Elantas (Altana) Conapoxy FR-1210 w/ EA-028 Hardener Datasheet Elantas (Altana) Conapoxy FR-1210 w/ EA-028 Hardener

Information provided by Gluespec
  • Description for Elantas (Altana) Conapoxy FR-1210 w/ EA-028 Hardener

    A filled epoxy potting casting resin system possessing low shrinkage, low coefficient of expansion, good resistance to mechanical and thermal shock and good electrical properties.

    *See Terms of Use Below

    Brand Conapoxy, Cytec
    Application Type Casting, Potting, Encapsulate
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Good electrical properties
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method 2 Parts, Room temperature
    Cure Temperature (°C) 25 Room Temperature, 60
    Cure Time (min) 1,440, 120
    Viscosity (cPs) Low, 9,000
    Color Clear Amber
    High Temperature Resistance (°C) Very good thermal resistance, Good thermal shock resistance
    Other Resistance Good Mechanical Resistance
    Volume Resistivity (O) 3.0e13 (ohm-cm)
  • Technical Data for Elantas (Altana) Conapoxy FR-1210 w/ EA-028 Hardener

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Industry
    • Chemistry
    • Cure Method
      • Room Temperature / Air Dry - Room temperature
      • 2-Part Cure - 2 Parts
    • Color
      • Clear / Transparent - Clear Amber
    • Brand
      • Conapoxy
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25 Room Temperature, 60 Test Method
    Cure Time (min) 1,440, 120 Test Method
    Viscosity (cPs) Low, 9,000 Test Method
    Set Time (min) 40 Test Method
    Linear Shrinkage (%) 0.90, Low
    Mix Ratio 100:14 (by weight)
    Bond Strength
    Compressive Strength (psi) 12,000
    Flexural Strength (psi) 7,000
    Tensile Strength (psi) 6,500
    Material Resistance
    High Temperature Resistance (°C) Very good thermal resistance, Good thermal shock resistance
    Other Resistance Good Mechanical Resistance
    Conductivity
    Dissipation Factor 0.00600 Test Method
    Filler Filled
    Dielectric Strength (V/mil) 375 (volts / mil), Good electrical properties
    Dielectric Constant 4.90 Test Method
    Thermal Conductivity (W/m°K) 7-10 (cal/sec/cm2/ºC/cm)
    Volume Resistivity (O) 3.0e13 (ohm-cm) Test Method
    Surface Resistivity (O) 2.5e15 (ohms) Test Method
    Hardness
    Shore D Hardness 80, 80 to 90
    Flexibility Limited flexibility
    Other Properties
    Glass Transition Temp (Tg) (°C) 70 to 75
    Specific Gravity 1.540 Test Method
    Coefficient of Thermal Expansion (CTE) Low, 45e-6 to 50e-6 (in./ in/°C)
    Business Information
    Shelf Life Details Maintain containers at temperatures of 20°– 30ºC (68º–86ºF) and keep securely closed when not in use. CONAPOXY FR-1210 and curatives have a shelf life of 18 months from date of manufacture when stored in the original unopened containers at 20º–30ºC (68–86ºF).
    Shelf Life Temperature (°F) 68 to 86
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) Conapoxy FR-1210 w/ EA-028 Hardener

    *See Terms of Use Below

    1. Mixing

      Settling of fillers may occur in the resin. Please mix before use.

  • Comparable Materials for Elantas (Altana) Conapoxy FR-1210 w/ EA-028 Hardener

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Epoxies in the Aerospace Industry

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conapoxy FR-1210 w/ EA-028 Hardener

Gluespec Poll

Which answer best describes a project you are currently working on?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
25°C Room Temperature
60°C Alternate Cure
Cure Time Test Methods
Cure Time Test Method
1,440 min
120 min Alternate Cure
Set Time Test Methods
Set Time Set Temperature Test Method
40 min 25°C Room Temperature Gel Time
Viscosity Test Methods
Viscosity Temperature
Low
9,000 cPs 25°C Room Temperature
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.90 25°C Room Temperature @ 1 KHz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.00600 25°C Room Temperature @ 1 KHz
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
3.0e13 (ohm-cm) 25°C Room Temperature
Surface Resistivity Test Methods
Surface Resistivity Temperature
2.5e15 (ohms) 25°C Room Temperature
Specific Gravity Test Methods
Specific Gravity Temperature
1.540 25°C