Elantas (Altana) Conapoxy FR-1210 w/ EA-117 Hardener

Elantas (Altana) Conapoxy FR-1210 w/ EA-117 Hardener Datasheet
  • Description for Elantas (Altana) Conapoxy FR-1210 w/ EA-117 Hardener

    A filled epoxy potting casting resin system possessing low shrinkage, low coefficient of expansion, good resistance to mechanical and thermal shock and good electrical properties. FR1212 is the black version.

    *See Terms of Use Below

    Brand Conapoxy, Cytec
    Application Type Cast, Pot, Encapsulate
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Industry Electrical
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method 2 Parts
    Cure Temperature (°C) High, 40, 130
    Cure Time (min) 60, 180
    Viscosity (cPs) Medium/High, 10,000
    Color Tan, Dark Amber
    High Temperature Resistance (°C) 155, High, Good thermal shock resistance
    Other Resistance Good Mechanical resistance
    Key Specifications UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL-94HB
  • Technical Data for Elantas (Altana) Conapoxy FR-1210 w/ EA-117 Hardener

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
    • Material Form
      • Liquid
    • Industry
    • Chemistry
    • Cure Method
      • 2-Part Cure - 2 Parts
    • Color
      • Brown - Tan
      • Red - Dark Amber
    • Key Specifications
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94 HB - UL-94HB
    • Brand
      • Conapoxy
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) High, 40, 130
    Cure Time (min) 60, 180
    Viscosity (cPs) Medium/High, 10,000 Test Method
    Set Time (min) 480 Test Method
    Linear Shrinkage (%) 0.60, Low
    Mix Ratio 100:10 (by weight)
    Bond Strength
    Compressive Strength (psi) 15,000
    Flexural Strength (psi) 12,000
    Tensile Strength (psi) 7,200
    Material Resistance
    High Temperature Resistance (°C) 155, High, Good thermal shock resistance
    Other Resistance Good Mechanical resistance
    Conductivity
    Dissipation Factor 0.02900 Test Method
    Filler Filled
    Dielectric Strength (V/mil) 370 (Vpm), Good
    Dielectric Constant 4.00 Test Method
    Thermal Conductivity (W/m°K) 6-9 (cal/sec/cm2/°C/cm)
    Volume Resistivity (O) 4.0e14 (ohms/cm) Test Method
    Surface Resistivity (O) 4.5e15 (ohms) Test Method
    Hardness
    Shore D Hardness 85
    Flexibility Rigid
    Other Properties
    Glass Transition Temp (Tg) (°C) 155 to 165
    Specific Gravity 1.520 Test Method
    Coefficient of Thermal Expansion (CTE) Low, 45e-6 to 55e-6 (in./ in/°C)
    Business Information
    Shelf Life Details The shelf life of CONAPOXY FR-1210 and CONAPOXY FR-1212 resins and curatives is 18 months from date of manufacture when stored in the original unopened containers at Temperatures of 20ºC- 30ºC (68ºF-86ºF).
    Shelf Life Temperature (°F) 68 to 86
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) Conapoxy FR-1210 w/ EA-117 Hardener

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) Conapoxy FR-1210 w/ EA-117 Hardener

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Questions about this material?

Elantas (Altana) - Conapoxy FR-1210 w/ EA-117 Hardener

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

The effectiveness of adhesives in the wind power industry

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Epoxies in the Aerospace Industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Set Time Test Methods
Set Time Set Temperature
480 min 25°C
Viscosity Test Methods
Viscosity Temperature
Medium/High
10,000 cPs 25°C
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.00 25°C Dielectric constant @ 1 KHz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.02900 25°C Dissipation Factor @ 1 KHz
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
4.0e14 (ohms/cm) 25°C
Surface Resistivity Test Methods
Surface Resistivity Temperature
4.5e15 (ohms) 25°C
Specific Gravity Test Methods
Specific Gravity Temperature
1.520 25°C