Elantas (Altana) Conapoxy FR-1274 Datasheet Elantas (Altana) Conapoxy FR-1274

Information provided by Gluespec
  • Description for Elantas (Altana) Conapoxy FR-1274

    A two-component, low exotherm, flame retardant, long pot life epoxy potting and casting system with excellent handling properties.

    *See Terms of Use Below

    Brand Conapoxy, Cytec
    Application Type Cast, Pot, Encapsulate
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Coils, Electrical, Transformers, Electronics, Modules, Strain sensitive devices
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method Part A/Part B
    Cure Temperature (°C) 25, 60, 80
    Cure Time (min) 1,440 to 2,880, 180 to 300, 60 to 120
    Viscosity (cPs) 40,000
    High Temperature Resistance (°C) Excellent thermal shock resistance
    Volume Resistivity (O) 8e14 (ohms/cm)
    Density (g/cm³) 0.06 (lb./cu.in.)
    Key Specifications UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94: 1/8" (UL Recognized) UL-94 V0
  • Technical Data for Elantas (Altana) Conapoxy FR-1274

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Industry
      • Electronics - Electrical, Modules, Strain sensitive devices
      • Coils
      • Transformers
    • Chemistry
    • Cure Method
      • 2-Part Cure - Part A/Part B
    • Key Specifications
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) : UL 94 : V0 - 1/8" (UL Recognized) UL-94 V0
    • Brand
      • Conapoxy
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 60, 80
    Cure Time (min) 1,440 to 2,880, 180 to 300, 60 to 120
    Viscosity (cPs) 40,000 Test Method
    Set Time (min) 120 to 180 Test Method
    Linear Shrinkage (%) Low, 0.001(in./in.)
    Work / Pot Time (min) Long
    Mix Ratio 1:1 (by volume), 1:1 (by weight)
    Bond Strength
    Compressive Strength (psi) 10,400
    Tensile Strength (psi) 5,500
    Material Resistance
    High Temperature Resistance (°C) Excellent thermal shock resistance
    Conductivity
    Dissipation Factor 0.07600, 0.02200, 0.01400 Test Method
    Filler Non-abrasive
    Dielectric Strength (V/mil) 400 (vpm)
    Dielectric Constant 4.42, 4.25, 3.91 Test Method
    Thermal Conductivity (W/m°K) Good, 20e-4 (cal/cm/sec/cm2/ºC)
    Volume Resistivity (O) 8e14 (ohms/cm)
    Surface Resistivity (O) 3e17 (ohms)
    Hardness
    Shore D Hardness 80
    Elongation (%) 8
    Other Properties
    Glass Transition Temp (Tg) (°C) 45 to 55
    Coefficient of Thermal Expansion (CTE) 22e-6 (in./ in/°C)
    Density (g/cm³) 0.06 (lb./cu.in.)
    Business Information
    Shelf Life Details CONAPOXY FR-1274 Part A and Part B contain filler which may settle during storage. It is recommended that both components be thoroughly mixed before use.;The shelf life of CONAPOXY FR-1274 is 18 months from date of manufacture when stored at 65ºF-85°F in the original unopened containers.
    Shelf Life Temperature (°F) 65 to 85
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) Conapoxy FR-1274

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) Conapoxy FR-1274

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Epoxies in the Aerospace Industry

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conapoxy FR-1274

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Set Time Test Methods
Set Time Set Temperature Test Method
120 to 180 min 25°C 1/2 lb. mass
Viscosity Test Methods
Viscosity Temperature
40,000 cPs 25°C
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.42 25°C Dielectric constant @ 100 Hz
4.25 25°C Dielectric constant @ 1 KHz
3.91 25°C Dielectric constant @ 1 MHz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.07600 25°C Dissipation Factor @ 100 Hz
0.02200 25°C Dissipation Factor @ 1 KHz
0.01400 25°C Dissipation Factor @ 1 MHz