

-
Description for Elantas (Altana) Conapoxy FR-1402
Two component; Excellent thermal shock resistance; low exotherm; flame retardantNote: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.
Brand Cytec Application Type Cast, Pot, Encapsulate 1 Part or 2 Part 2-Part Material Form Liquid Industry Electrical, Transformers, Coils, Electronics, Modules, Strain sensitive devices Manufacturer Elantas (Altana) Chemistry Epoxy Cure Method Part A/Part B Cure Temperature (°C) 25 Viscosity (cPs) 8,700 High Temperature Resistance (°C) Excellent thermal shock resistance Volume Resistivity (O) 4.4e13 (ohms/cm) Key Specifications UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94: UL-94 V0 -
Technical Data for Elantas (Altana) Conapoxy FR-1402
Overview
-
Application Type
- Casting / Moldmaking - Cast
- Pottant / Encapsulant - Pot, Encapsulate
-
1 Part or 2 Part
- 2-Part
-
Material Form
- Liquid
-
Industry
- Electronics - Electrical, Modules, Strain sensitive devices
- Transformers
- Coils
-
Chemistry
-
Cure Method
- 2-Part Cure - Part A/Part B
-
Key Specifications
- UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) : UL 94 : V0 - UL-94 V0
-
Brand
- Cytec
Specifications
Cure Specs
Cure Temperature (°C) 25 Viscosity (cPs) 8,700 Test Method Work / Pot Time (min) Medium Test Method Mix Ratio 1:1 (by volume), 1:1 (by weight) Bond Strength
Tensile Strength (psi) 2,670 Material Resistance
Flame Resistance Flame Resistant High Temperature Resistance (°C) Excellent thermal shock resistance Conductivity
Dissipation Factor 0.08000, 0.04800, 0.02400 Test Method Dielectric Strength (V/mil) >400 (vpm) Test Method Dielectric Constant 5.41, 4.95, 4.22 Test Method Surface Resistivity (O) 7.4e15 (ohm) Test Method Volume Resistivity (O) 4.4e13 (ohms/cm) Test Method Hardness
Shore D Hardness 82 Elongation (%) 5, 10 Other Properties
Specific Gravity 1.540, 1.570 Business Information
Shelf Life Details Part A and Part B of CONAPOXY® FR-1402 have a shelf life of 15 months from date of manufacture when stored in the original unopened containers at 70°-85°F. CONAPOXY® FR-1402 Part A and Part B contain filler. The filler may settle during storage. It is recommended that both components be thoroughly mixed before use. Shelf Life Temperature (°F) 70 to 85 Shelf Life Type From date of manufacture Shelf Life (mon) 15 -
-
Best Practices
Best Practices information currently not available. -
Comparable Materials for Elantas (Altana) Conapoxy FR-1402
Spec Engine® Results
Popular Articles
Testing the effectiveness of surface treatments
Read ArticleThe effectiveness of adhesives in the wind power industry
Read ArticleEpoxies in the Aerospace Industry
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Viscosity Test Methods
Viscosity | Temperature |
---|---|
8,700 cPs | 25°C |
Work / Pot Time Test Methods
Work / Pot Time | Test Method | Temperature |
---|---|---|
Medium |
Dielectric Constant Test Methods
Dielectric Constant | Temperature | Test Method |
---|---|---|
5.41 | 25°C | Dielectric Constant @ 100 Hz |
4.95 | 25°C | Dielectric Constant @ 1 KHz |
4.22 | 25°C | Dielectric Constant @ 1 MHz |
Dielectric Strength Test Methods
Dielectric Strength | Temperature | Test Method |
---|---|---|
>400 (vpm) | 25°C | 0.125” thick |
Dissipation Factor Test Methods
Dissipation Factor | Temperature | Test Method |
---|---|---|
0.08000 | 25°C | Dissipation Factor @ 100 Hz |
0.04800 | 25°C | Dissipation Factor @ 1 KHz |
0.02400 | 25°C | Dissipation Factor @ 1 MHz |
Surface Resistivity Test Methods
Surface Resistivity | Temperature |
---|---|
7.4e15 (ohm) | 25°C |
Volume Resistivity Test Methods
Volume Resistivity | Temp (°C) |
---|---|
4.4e13 (ohms/cm) | 25°C |