Elantas (Altana) Conapoxy FR-1405 Datasheet Elantas (Altana) Conapoxy FR-1405

CONTACT REP
Information provided by Gluespec

  • Description for Elantas (Altana) Conapoxy FR-1405

    A two component, room temperature, low exotherm, flame retardant, long pot life epoxy potting and casting system with excellent properties. Because of its excellent thermal shock resistance, It is recommended for the encapsulation of strain sensitive devices.

    *See Terms of Use Below

    Brand Cytec, Conapoxy
    Application Type Casting, Pot, Encapsulate
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Industry electrical/electronic devices, Transformers, coils, modules
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method Resin/Hardener
    Cure Temperature (°C) 25, 60
    Cure Time (min) 10,080, 480
    Viscosity (cPs) 7,500
    High Temperature Resistance (°C) excellent thermal shock resistance
  Download Technical Data Sheet   Save This Material   Compare Saved Items

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Epoxies in the Aerospace Industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Which answer best describes a project you are currently working on?
Set Time Test Methods
Set Time Set Temperature Test Method
480 to 600 min 25°C (200 gm mass)
Viscosity Test Methods
Viscosity Temperature
7,500 cPs 25°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
Long
180 to 240 min (200 gm mass) 25°C
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.80 25°C Dielectric Constant @ 100 Hz
4.47 25°C Dielectric Constant @ 1 KHz
3.94 25°C Dielectric Constant @ 1 MHz
Dielectric Strength Test Methods
Dielectric Strength Test Method
>400 (vpm) (0.125” thick)
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.06200 25°C Dissipation Factor @ 100 Hz
0.03800 25°C Dissipation Factor @ 1 KHz
0.01900 25°C Dissipation Factor @ 1 MHz
Surface Resistivity Test Methods
Surface Resistivity Temperature
2.1e15 25°C
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
5.3e13 (ohm-cm) 25°C