Elantas (Altana) Conapoxy RN-1000 w/ EA-02 Hardener Datasheet Elantas (Altana) Conapoxy RN-1000 w/ EA-02 Hardener

Information provided by Gluespec
  • Description for Elantas (Altana) Conapoxy RN-1000 w/ EA-02 Hardener

    A diluted epoxy potting and casting resin. When cured with the hardeners listed, these systems possess low shrinkage, low exotherm, good thermal shock and electrical properties.

    *See Terms of Use Below

    Brand Cytec, Conapoxy
    Application Type Casting, Potting, Encapsulation
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Electrical devices, Transformers, Coils, Electronic devices, Modules
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method 2-Part Cure
    Cure Temperature (°C) 20 to 25 Room temperature, 25, 60
    Cure Time (min) 1,440, 120
    Viscosity (cPs) Low, 600
    Color Amber
    Arc Resistance (sec) Very good arc resistance
    High Temperature Resistance (°C) Good thermal shock resistance
    Volume Resistivity (O) 3.0e14 (ohms/cm)
  • Technical Data for Elantas (Altana) Conapoxy RN-1000 w/ EA-02 Hardener

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Industry
      • Electronics - Electrical devices, Modules, Electronic devices
      • Transformers
      • Coils
    • Chemistry
    • Application Method
      • Other - Hand-mix bench potting / casting, Meter-mix bench potting / casting, Meter-mix vacuum potting / casting
    • Cure Method
      • 2-Part Cure
    • Color
      • Red - Amber
    • Brand
      • Conapoxy
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 20 to 25 Room temperature, 25, 60
    Cure Time (min) 1,440, 120
    Viscosity (cPs) Low, 600 Test Method
    Set Time (min) 30 Test Method
    Linear Shrinkage (%) 1.30, Low
    Work / Pot Time (min) 30
    Mix Ratio 100:11 (by weight), 100:13 (by volume)
    Bond Strength
    Compressive Strength (psi) 15,000 Test Method
    Flexural Strength (psi) 14,000
    Tensile Strength (psi) 10,000 Test Method
    Material Resistance
    Arc Resistance (sec) Very good arc resistance
    High Temperature Resistance (°C) Good thermal shock resistance
    Conductivity
    Dissipation Factor 0.00200 Test Method
    Dielectric Strength (V/mil) 350, Good Test Method
    Dielectric Constant 3.50 Test Method
    Thermal Conductivity (W/m°K) 4.5e-4 (cal/sec/cm2/°C/cm)
    Surface Resistivity (O) 2.0e15 (ohms) Test Method
    Volume Resistivity (O) 3.0e14 (ohms/cm) Test Method
    Hardness
    Shore D Hardness 80 to 90, 80
    Flexibility Rigid
    Other Properties
    Glass Transition Temp (Tg) (°C) 80 to 185 Test Method
    Specific Gravity 1.128 Test Method
    Coefficient of Thermal Expansion (CTE) 50e-6 to 55e-6 (in./ in/°C)
    Flash Point (°F) 201.2
    Business Information
    Shelf Life Details The shelf life of CONAPOXY RN-1000 and the curatives is 18 months from date of manufacture when stored in the original unopened container at temperatures of 65ºF-85°F., Store at or below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for twelve (12) months from the date of shipment.
    Shelf Life Temperature (°F) 65 to 85, <77
    Shelf Life Type From date of manufacture, from the date of shipment
    Shelf Life (mon) 18, 0
  • Best Practices for Elantas (Altana) Conapoxy RN-1000 w/ EA-02 Hardener

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) Conapoxy RN-1000 w/ EA-02 Hardener

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Epoxies in the Aerospace Industry

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Set Time Test Methods
Set Time Set Temperature Test Method
30 min 25°C Gel Time, Mixed
Viscosity Test Methods
Viscosity Test Method Temperature
Low
600 cPs Mixed, initial 25°C
Compressive Strength Test Methods
Compressive Strength Cure Temperature Test Method
15,000 psi 25°C ASTM D149
Tensile Strength Test Methods
Tensile Strength Cure Temperature Test Method
10,000 psi 25°C ASTM D412
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
3.50 25°C ASTM D150, 1 kHz
Dielectric Strength Test Methods
Dielectric Strength Temperature Test Method
350 V/mil 25°C ASTM D149
Good
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.00200 25°C ASTM D150, 1 kHz
Surface Resistivity Test Methods
Surface Resistivity Temperature Test Method
2.0e15 (ohms) 25°C ASTM D257
Volume Resistivity Test Methods
Volume Resistivity Temp (°C) Test Method
3.0e14 (ohms/cm) 25°C ASTM D257
Glass Transition Temp (Tg) Test Methods
Glass Transition Temp (Tg) Glass Transition Temperature (Tg) Test Method
80 to 185°C DSC
Specific Gravity Test Methods
Specific Gravity Temperature
1.128 25°C