Elantas (Altana) Conapoxy RN-1000 w/ EA-028 Hardener Datasheet Elantas (Altana) Conapoxy RN-1000 w/ EA-028 Hardener

Information provided by Gluespec
  • Description for Elantas (Altana) Conapoxy RN-1000 w/ EA-028 Hardener

    A diluted epoxy potting and casting resin. When cured with the hardeners listed, these systems possess low shrinkage, low exotherm, good thermal shock and electrical properties.

    *See Terms of Use Below

    Brand Cytec, Conapoxy
    Application Type Casting, Potting, Encapsulation
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Electrical devices, Transformers, Coils, Electronic devices, Modules
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method 2-Part Cure
    Cure Temperature (°C) 25, 60
    Cure Time (min) 1,440, 120
    Viscosity (cPs) Low, 500
    Color Amber
    Arc Resistance (sec) Very good arc resistance
    High Temperature Resistance (°C) Excellent thermal shock resistance
    Volume Resistivity (O) 4.0e12 (ohm-cm)
  • Technical Data for Elantas (Altana) Conapoxy RN-1000 w/ EA-028 Hardener

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Industry
      • Electronics - Electrical devices, Electronic devices, Modules
      • Transformers
      • Coils
    • Chemistry
    • Application Method
      • Other - Hand-mix bench potting / casting, Meter-mix bench potting / casting, Meter-mix vacuum potting / casting
    • Cure Method
      • 2-Part Cure
    • Color
      • Red - Amber
    • Brand
      • Conapoxy
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 60
    Cure Time (min) 1,440, 120
    Viscosity (cPs) Low, 500 Test Method
    Set Time (min) 30 Test Method
    Linear Shrinkage (%) 1.40, Low Test Method
    Work / Pot Time (min) 30
    Mix Ratio 100:28 (by weight)
    Bond Strength
    Compressive Strength (psi) 14,000 Test Method
    Flexural Strength (psi) 6,000
    Tensile Strength (psi) 4,000 Test Method
    Material Resistance
    Arc Resistance (sec) Very good arc resistance
    High Temperature Resistance (°C) Excellent thermal shock resistance
    Conductivity
    Dissipation Factor 0.01500 Test Method
    Dielectric Strength (V/mil) 350, Good Test Method
    Dielectric Constant 4.70 Test Method
    Thermal Conductivity (W/m°K) 4.5e-4 (cal/sec/cm2/°C/cm), 0.20
    Surface Resistivity (O) 9.5e14 (Ohms) Test Method
    Volume Resistivity (O) 4.0e12 (ohm-cm) Test Method
    Hardness
    Shore D Hardness 80 to 90, 80 Test Method
    Flexibility Limited flexibility
    Other Properties
    Glass Transition Temp (Tg) (°C) 60 to 65, 65 Test Method
    Specific Gravity 1.112 Test Method
    Coefficient of Thermal Expansion (CTE) 50e-6 to 55e-6 (in./ in/°C), 55 (ppm / °C)
    Business Information
    Shelf Life Details The shelf life of CONAPOXY RN-1000 and the curatives is 18 months from date of manufacture when stored in the original unopened container at temperatures of 65ºF-85°F., Store at or below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for twelve (12) months from the date of shipment.
    Shelf Life Temperature (°F) 65 to 85, <77
    Shelf Life Type From date of manufacture, From the date of shipment
    Shelf Life (mon) 18, 12
  • Best Practices for Elantas (Altana) Conapoxy RN-1000 w/ EA-028 Hardener

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) Conapoxy RN-1000 w/ EA-028 Hardener

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Epoxies in the Aerospace Industry

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conapoxy RN-1000 w/ EA-028 Hardener

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Linear Shrinkage Test Methods
Linear Shrinkage Test Method Temp
1.40 % MIL-M-24041C 25°C
Low MIL-M-24041C
Set Time Test Methods
Set Time Set Temperature
30 min 25°C
Viscosity Test Methods
Viscosity Temperature
Low
500 cPs 25°C
Compressive Strength Test Methods
Compressive Strength Cure Temperature Test Method
14,000 psi 25°C ASTM D695
Tensile Strength Test Methods
Tensile Strength Cure Temperature Test Method
4,000 psi 25°C ASTM D412
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.70 25°C ASTM D150, 1 kHz
Dielectric Strength Test Methods
Dielectric Strength Temperature Test Method
350 V/mil 25°C ASTM D149
Good
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.01500 25°C ASTM D150, 1 kHz
Surface Resistivity Test Methods
Surface Resistivity Temperature Test Method
9.5e14 (Ohms) 25°C ASTM D257
Volume Resistivity Test Methods
Volume Resistivity Temp (°C) Test Method
4.0e12 (ohm-cm) 25°C ASTM D257
Shore D Hardness Test Methods
Shore D Hardness Shore Hardness Test Method
80 to 90
80 ASTM D2240
Glass Transition Temp (Tg) Test Methods
Glass Transition Temp (Tg) Glass Transition Temperature (Tg) Test Method
60 to 65°C
65°C DSC
Specific Gravity Test Methods
Specific Gravity Temperature
1.112 25°C