Elantas (Altana) Conapoxy RN-1000 w/ EA-117 Hardener Datasheet Elantas (Altana) Conapoxy RN-1000 w/ EA-117 Hardener

Information provided by Gluespec
  • Description for Elantas (Altana) Conapoxy RN-1000 w/ EA-117 Hardener

    A diluted epoxy potting and casting resin. When cured with the hardeners listed, these systems possess low shrinkage, low exotherm, good thermal shock and electrical properties.

    *See Terms of Use Below

    Brand Cytec, Conapoxy
    Application Type Cast, Pot, Encapsulate
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Electrical
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method 2 Parts
    Cure Temperature (°C) 40, 130
    Cure Time (min) 60, 180
    Viscosity (cPs) Medium/High, 800
    Color Dark Amber
    High Temperature Resistance (°C) 130, High
    Volume Resistivity (O) 3.5e14 (ohms/cm)
  • Technical Data for Elantas (Altana) Conapoxy RN-1000 w/ EA-117 Hardener

    Overview
    Specifications
    Cure Specs
    Cure Temperature (°C) 40, 130
    Cure Time (min) 60, 180
    Viscosity (cPs) Medium/High, 800 Test Method
    Set Time (min) 480 Test Method
    Linear Shrinkage (%) 1.10, Low
    Work / Pot Time (min) Long, 480
    Mix Ratio 100:20 (by weight)
    Bond Strength
    Compressive Strength (psi) 19,000
    Flexural Strength (psi) 17,000
    Tensile Strength (psi) 12,000
    Material Resistance
    High Temperature Resistance (°C) 130, High
    Conductivity
    Dissipation Factor 0.01000 Test Method
    Dielectric Strength (V/mil) 400 (Vpm)
    Dielectric Constant 4.40 Test Method
    Thermal Conductivity (W/m°K) 4.5e-4 (CAL x CM/SEC x SQcm x °C)
    Surface Resistivity (O) 5.0e16 (ohms) Test Method
    Volume Resistivity (O) 3.5e14 (ohms/cm) Test Method
    Hardness
    Shore D Hardness 90
    Flexibility Rigid
    Other Properties
    Glass Transition Temp (Tg) (°C) 130 to 135
    Specific Gravity 1.200 Test Method
    Coefficient of Thermal Expansion (CTE) 50e-6 to 55e-6 (in./ in/°C)
    Business Information
    Shelf Life Details The shelf life of CONAPOXY® RN-1000 and the hardeners is 18 months from date of manufacture when stored in the original unopened container at temperatures of 65-85°F.CONACURE® EA-117 may crystallize. Heat to 60°C to re-melt and mix thoroughly.
    Shelf Life Temperature (°F) 65 to 85
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) Conapoxy RN-1000 w/ EA-117 Hardener

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) Conapoxy RN-1000 w/ EA-117 Hardener

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Epoxies in the Aerospace Industry

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conapoxy RN-1000 w/ EA-117 Hardener

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Set Time Test Methods
Set Time Set Temperature
480 min 25°C
Viscosity Test Methods
Viscosity Temperature
Medium/High
800 cPs 25°C
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.40 25°C Dielectric constant @ 1 KHz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.01000 25°C Dissipation Factor @ 1 KHz
Surface Resistivity Test Methods
Surface Resistivity Temperature
5.0e16 (ohms) 25°C
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
3.5e14 (ohms/cm) 25°C
Specific Gravity Test Methods
Specific Gravity Temperature
1.200 25°C