Elantas (Altana) Conapoxy RN-1200 w/ EA-87 Hardener

Elantas (Altana) Conapoxy RN-1200 w/ EA-87 Hardener Datasheet
  • Description for Elantas (Altana) Conapoxy RN-1200 w/ EA-87 Hardener

    An undiluted, epoxy potting and casting resin. When cured with any of the hardeners listed, these systems possess low viscosity, low shrinkage, low exotherm, excellent resistance to thermal shock, and good electrical properties.

    *See Terms of Use Below

    Brand Conapoxy, Cytec
    Application Type Cast, Pot, Encapsulate
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Industry Electrical
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method 2 Parts
    Cure Temperature (°C) 25, 60
    Cure Time (min) 1,440, 120
    Viscosity (cPs) Low, 1,500
    Color Light Amber, Amber
    High Temperature Resistance (°C) Excellent Thermal shock resistance
  • Technical Data for Elantas (Altana) Conapoxy RN-1200 w/ EA-87 Hardener

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
    • Material Form
      • Liquid
    • Industry
    • Chemistry
    • Cure Method
      • 2-Part Cure - 2 Parts
    • Color
      • Red - Light Amber, Amber
    • Brand
      • Conapoxy
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 60
    Cure Time (min) 1,440, 120
    Viscosity (cPs) Low, 1,500 Test Method
    Set Time (min) 60 Test Method
    Linear Shrinkage (%) 0.80, Low
    Work / Pot Time (min) 60
    Mix Ratio 100:37 (by weight)
    Bond Strength
    Compressive Strength (psi) 13,500
    Flexural Strength (psi) 9,000
    Tensile Strength (psi) 8,100
    Material Resistance
    High Temperature Resistance (°C) Excellent Thermal shock resistance
    Conductivity
    Dissipation Factor 0.03500 Test Method
    Dielectric Strength (V/mil) 350 (vpm), Good
    Dielectric Constant 4.20 Test Method
    Thermal Conductivity (W/m°K) 4.5e-4 (cal/sec/cm2/°C/cm)
    Volume Resistivity (O) 4.2e15 (ohms/cm) Test Method
    Surface Resistivity (O) 8.8e15 (ohms) Test Method
    Hardness
    Shore D Hardness 75
    Flexibility Limited flexibility
    Other Properties
    Glass Transition Temp (Tg) (°C) 85 to 90
    Specific Gravity 1.050, 1.150 to 1.170, 0.960 Test Method
    Coefficient of Thermal Expansion (CTE) 55e-6 (in./ in/°C)
    Business Information
    Shelf Life Details The shelf life of CONAPOXY RN-1200 and the curatives is 18 months from date of manufacture when stored in the original unopened containers at temperatures of 20ºC-30ºC (68ºF-86ºF). CONACURE EA-117 may crystallize. Heat to 60°C to re-melt and mix thoroughly.
    Shelf Life Temperature (°F) 68 to 86
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) Conapoxy RN-1200 w/ EA-87 Hardener

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) Conapoxy RN-1200 w/ EA-87 Hardener

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Elantas (Altana) - Conapoxy RN-1200 w/ EA-87 Hardener

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Epoxies in the Aerospace Industry

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Set Time Test Methods
Set Time Set Temperature
60 min 25°C
Viscosity Test Methods
Viscosity Temperature
Low
1,500 cPs 25°C
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.20 25°C Dielectric constant, 1 KHz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.03500 25°C Dissipation Factor @ 1 KHz
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
4.2e15 (ohms/cm) 25°C
Surface Resistivity Test Methods
Surface Resistivity Temperature
8.8e15 (ohms) 25°C
Specific Gravity Test Methods
Specific Gravity Temperature
1.050 25°C
1.150 to 1.170 25°C
0.960 25°C