Elantas (Altana) Conathane TU-8070 Datasheet Elantas (Altana) Conathane TU-8070

Information provided by Gluespec
  • Description for Elantas (Altana) Conathane TU-8070

    An unfilled, two component, room temperature curing, 100%-solids polyurethane system. Applications include potting and casting of industrial wheels, metal forming pads, flexible molds, washers, gaskets, bushings and vibration, shock or sound dampening pads.

    *See Terms of Use Below

    Brand Cytec
    Application Type Casting, Potting
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Potting and casting of washers, Potting and casting of industrial wheels, Potting and casting of bushings
    Manufacturer Elantas (Altana)
    Chemistry Non-MbOCA, Polyurethane
    Cure Method 2-Part cure, Room temperature cure
    Cure Temperature (°C) 25, 60
    Cure Time (min) 10,080 to 14,400, 960
    Viscosity (cPs) 1,000
    Color Amber
    Elastomeric Excellent elastomeric properties
    Can Be Used In Conjunction With These Materials Potting and casting of gaskets
  • Technical Data for Elantas (Altana) Conathane TU-8070

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Industry
      • Mechanical Fastening Parts - Potting and casting of washers
      • Industrial - Potting and casting of metal forming pads
      • Industrial Wheels - Potting and casting of industrial wheels
      • Bushing - Potting and casting of bushings
      • Other - Potting and casting of flexible molds, Potting and casting of vibration dampening pads, Potting and casting of shock dampening pads, Potting and casting of sound dampening pads, Used for metal finishing linings , Used for metal polishing linings
    • Chemistry
    • Application Method
      • Other - Meter-mix vacuum potting / casting, Meter-mix bench potting / casting, Hand-mix bench potting / casting
    • Cure Method
      • Room Temperature / Air Dry - Room temperature cure
      • 2-Part Cure
    • Color
      • Red - Amber
    • Can Be Used In Conjunction With These Materials
      • Gaskets - Potting and casting of gaskets
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 60
    Cure Time (min) 10,080 to 14,400, 960
    Viscosity (cPs) 1,000 Test Method
    Work / Pot Time (min) 25 to 35 Test Method
    Mix Ratio 100:50 (by weight)
    Bond Strength
    Tear Strength (piw) 275 (pli) Test Method
    Tensile Strength (psi) 1,500, 550, 800 Test Method
    Material Resistance
    Abrasion Resistance Excellent
    Conductivity
    Unfilled Unfilled
    Hardness
    Shore A Hardness 70 Test Method
    Elastomeric Excellent elastomeric properties
    Elongation (%) 745 Test Method
    Other Properties
    % Solids (%) 100
    Business Information
    Shelf Life Details Store below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for twelve (12) months from the date of shipment.
    Shelf Life Temperature (°F) <77
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 12
  • Best Practices for Elantas (Altana) Conathane TU-8070

    *See Terms of Use Below

    1. Mixing

      Mix TU-8070 Part A and TU-8070 Part B in the ratio specified above until homogeneous. Components may be preheated up to 60°C if reduced viscosity is required. If hand mixing, degas at >27 in. Hg vacuum before use.

  • Comparable Materials for Elantas (Altana) Conathane TU-8070

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Characteristics of MMAs

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conathane TU-8070

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Viscosity Test Methods
Viscosity Test Method Temperature
1,000 cPs Initial, Mixed 25°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
25 to 35 min Work life, Mixed 25°C
Tear Strength Test Methods
Tear Strength Test Method
275 (pli) ASTM D412, Graves
Tensile Strength Test Methods
Tensile Strength Cure Temperature Test Method
1,500 psi 25°C ASTM D412
550 psi ASTM D412, 100% modulus
800 psi ASTM D412, 300% Modulus
Elongation Test Methods
Elongation Test Method
745 % Ultimate elongation, ASTM D412, 25°C
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
70 ASTM D2240, 25°C