Elantas (Altana) Conathane TU-8080 Datasheet Elantas (Altana) Conathane TU-8080

Information provided by Gluespec
  • Description for Elantas (Altana) Conathane TU-8080

    An unfilled, two-component, room temperature curing, 100%-solids polyurethane system. It has Excellent abrasion resistance and Excellent physical properties.

    *See Terms of Use Below

    Brand Conathane, Cytec
    Application Type Casting, Potting
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Substrate Metal
    Industry Potting and casting of industrial wheels, Potting and casting of bushings
    Manufacturer Elantas (Altana)
    Chemistry Polyurethane
    Cure Method 2- Part cure, Room temperature cure
    Cure Temperature (°C) 25, 60
    Cure Time (min) 10,080 to 14,400, 960
    Viscosity (cPs) 3,900
    Color Amber
    Volume Resistivity (O) 5.0e16 (ohm-cm), 2.0e9 (ohm-cm)
    Elastomeric Elastomeric
    Can Be Used In Conjunction With These Materials Gaskets
  • Technical Data for Elantas (Altana) Conathane TU-8080

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Industrial Wheels - Potting and casting of industrial wheels
      • Bushing - Potting and casting of bushings
      • Other - Commonly used for metal polishing, Commonly used for finishing linings, Potting and casting of metal forming pads, Potting and casting of flexible molds, Drop hammer faces, Potting and casting of washers, Diaphragms, Potting and casting of sound dampening pads, Potting and casting of vibration dampening pads, Potting and casting of shock dampening pads
    • Chemistry
    • Cure Method
      • Room Temperature / Air Dry - Room temperature cure
      • 2-Part Cure - 2- Part cure
    • Color
      • Clear / Transparent - Amber
    • Can Be Used In Conjunction With These Materials
      • Gaskets
    • Brand
      • Conathane
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 60
    Cure Time (min) 10,080 to 14,400, 960
    Viscosity (cPs) 3,900 Test Method
    Linear Shrinkage (%) 1.20, <0.50 Test Method
    Work / Pot Time (min) 20 to 25 Test Method
    Mix Ratio 100:28 (by volume), 100:30 (by weight)
    Bond Strength
    Tear Strength (piw) 465 (pli), 110 (pli) Test Method
    Tensile Strength (psi) 3,500, 800, 925, 1,000 Test Method
    Material Resistance
    Abrasion Resistance Excellent abrasion resistance
    Conductivity
    Unfilled Unfilled
    Dissipation Factor 0.02700, 0.75000, 0.02300, 0.09500, 0.06600, 0.02800, 0.03000, 0.02000, 0.07000, 0.75000, 0.10000, 0.03000 Test Method
    Dielectric Strength (V/mil) 560 Test Method
    Dielectric Constant 5.90, 5.10, 5.70, 4.60, 4.70, 4.20 Test Method
    Surface Resistivity (O) 2.0e10 (ohms / sq.), 1.9e16 (ohms / sq.) Test Method
    Volume Resistivity (O) 5.0e16 (ohm-cm), 2.0e9 (ohm-cm) Test Method
    Hardness
    Shore A Hardness 80 Test Method
    Elastomeric Elastomeric
    Elongation (%) 875 Test Method
    Other Properties
    % Solids (%) 100
    Business Information
    Shelf Life Details Store below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for twelve (12) months from the date of shipment.; Failure to store the product as recommended above may lead to deterioration in product performance.
    Shelf Life Temperature (°F) <77
    Shelf Life Type From the date of shipment
    Shelf Life (mon) 12
  • Best Practices for Elantas (Altana) Conathane TU-8080

    *See Terms of Use Below

    1. Mixing

      Mix the TU-8080 Part A and TU-8080 Part B in the ratio specified above until homogeneous. Components may be preheated up to 60°C if reduced viscosity is required. If hand mixing, degas at >27 in. Hg vacuum before use.

      Mix individual components thoroughly before use.

    2. Curing

      Cure 7 - 10 days at 25°C / 77°F – or – 16 hours at 60°C / 140°F

      The cure schedules above are based on time after the unit reaches the specified temperature and are recommendations only. The user is responsible for determining the optimum cure conditions for his application.

  • Comparable Materials for Elantas (Altana) Conathane TU-8080

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Characteristics of MMAs

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conathane TU-8080

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Linear Shrinkage Test Methods
Linear Shrinkage Test Method Temp
1.20 % ASTM D2566 80°C
<0.50 % ASTM D2566 25°C
Viscosity Test Methods
Viscosity Test Method Temperature
3,900 cPs Mixed, Initial 25°C
Work / Pot Time Test Methods
Work / Pot Time Temperature
20 to 25 min 25°C
Tear Strength Test Methods
Tear Strength Cure Temperature Test Method
465 (pli) 25°C ASTM D-624, Graves, ASTM D412
110 (pli) 25°C ASTM D470, Split, ASTM D624
Tensile Strength Test Methods
Tensile Strength Test Method
3,500 psi ASTM D412
800 psi ASTM D412, 100% modulus
925 psi ASTM D412, 200% modulus
1,000 psi ASTM D412, 300% Modulus
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
5.90 25°C 100 Hz, ASTM D150
5.10 130°C 100 Hz, ASTM D150
5.70 25°C 1 KHz, ASTM D150
4.60 130°C 1 KHz, ASTM D150
4.70 25°C 1 KHz, ASTM D150
4.20 130°C 1 KHz, ASTM D150
Dielectric Strength Test Methods
Dielectric Strength Temperature Test Method
560 25°C ASTM D149, 1/16”
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.02700 25°C Dissipation Factor, 100 Hz
0.75000 130°C Dissipation Factor, 100 Hz
0.02300 25°C Dissipation Factor, 1 KHz
0.09500 130°C Dissipation Factor, 1 KHz
0.06600 25°C Dissipation Factor, 1 MHz
0.02800 130°C Dissipation Factor, 1 MHz
0.03000 25°C ASTM D150, 100 Hz
0.02000 25°C ASTM D150, 1 kHz
0.07000 25°C ASTM D150, 1 kHz
0.75000 130°C ASTM D150, 100 Hz
0.10000 130°C ASTM D150, 1 kHz
0.03000 130°C ASTM D150, 1 kHz
Surface Resistivity Test Methods
Surface Resistivity Temperature Test Method
2.0e10 (ohms / sq.) 25°C ASTM D257
1.9e16 (ohms / sq.) 130°C ASTM D257
Volume Resistivity Test Methods
Volume Resistivity Temp (°C) Test Method
5.0e16 (ohm-cm) 25°C ASTM D25
2.0e9 (ohm-cm) 130°C ASTM D25
Elongation Test Methods
Elongation Test Method
875 % Ultimate Elongation, ASTM D412, 25°C
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
80 ASTM D2240, 25°C