Elantas (Altana) FP-1305 Datasheet Elantas (Altana) FP-1305

Information provided by Gluespec
  • Description for Elantas (Altana) FP-1305

    A two-component, non-TDI, liquid polyurethane casting system produced under very carefully controlled conditions. This elastomeric system features excellent toughness, water resistance, and physical properties.

    *See Terms of Use Below

    Brand Cytec
    Chemical Resistance Chemical Resistance: Fluid Resistance: Water resistance
    Application Type Casting
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Medical, General purpose potting compound
    Manufacturer Elantas (Altana)
    Chemistry polyurethane
    Cure Method Resin/Hardener
    Cure Temperature (°C) 50, 25, 80, 25
    Cure Time (min) 300, 10,080, 240, 960
    Viscosity (cPs) 4,000, 900
    Color Clear Light Amber
  • Technical Data for Elantas (Altana) FP-1305

    Overview
    • Chemical Resistance
      • Chemical Resistance : Fluid Resistance : Water Resistance
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Industry
      • General Purpose - General purpose potting compound
      • Medical
    • Chemistry
    • Cure Method
      • 2-Part Cure - Resin/Hardener
    • Color
      • Clear / Transparent - Clear Light Amber
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 50, 25, 80, 25
    Cure Time (min) 300, 10,080, 240, 960
    Viscosity (cPs) 4,000, 900 Test Method
    Linear Shrinkage (%) Low
    Work / Pot Time (min) 15 Test Method
    Mix Ratio 100:1.19 (by volume), 100:100 (by weight)
    Bond Strength
    Tear Strength (piw) 450 (pli) Test Method
    Tensile Strength (psi) 3,200 Test Method
    Hardness
    Shore A Hardness 44, 95 Test Method
    Elongation (%) 150 Test Method
    Other Properties
    Specific Gravity 1.150, 0.970 Test Method
    Business Information
    Shelf Life Details CONATHANE FP-1305 has a shelf life of 18 months from date of manufacture when stored in the original unopened containers at 70°-85°F. Containers should be flushed with dry nitrogen or CONAP® Dri-Purge, each time they are opened, unless the contents are used within one day.
    Shelf Life Temperature (°F) 158 to 185
    Shelf Life Type From the date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) FP-1305

    *See Terms of Use Below

    1. Mixing

      The two components should be mixed thoroughly in metal or glass containers using metal or glass stirrers.

    2. Deairing/Degassing

      Degassing of the mixed system should be accomplished at room temperature at 5-10 mm Hg vacuum. Containers should be large enough to allow for frothing during the degassing process.

  • Comparable Materials for Elantas (Altana) FP-1305

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Characteristics of MMAs

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) FP-1305

Gluespec Poll

Which answer best describes a project you are currently working on?
Viscosity Test Methods
Viscosity Temperature
4,000 cPs 25°C
900 cPs 50°C
Work / Pot Time Test Methods
Work / Pot Time Temperature
15 min 60°C
Tear Strength Test Methods
Tear Strength Test Method
450 (pli) ASTM D624, Die C
Tensile Strength Test Methods
Tensile Strength Test Method
3,200 psi ASTM D412, Die C
Elongation Test Methods
Elongation Test Method
150 % ASTM D412, Die C
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
44 ASTM D2240,After 30 minutes @ 60°C
95 ASTM D2240, Fully Cured
Specific Gravity Test Methods
Specific Gravity Test Method
1.150 ASTM D1475
0.970 ASTM D1475