Elantas (Altana) FR-1820

Elantas (Altana) FR-1820 Datasheet
  • Description for Elantas (Altana) FR-1820

    A two-component, flame retardant, short pot life epoxy potting and casting system with excellent handling properties. It contains a non-abrasive filler to reduce wear on machine metering/dispensing equipment.

    *See Terms of Use Below

    Brand Cytec
    Application Type casting, Pot
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method Resin/Hardener
    Cure Temperature (°C) 25
    Cure Time (min) 1,440 to 2,160
    Viscosity (cPs) 6,900
    Color Black
    Key Specifications Comply with Directive 2011/65/EU, UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94: UL94 V-0
  • Technical Data for Elantas (Altana) FR-1820

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
    • Material Form
      • Liquid
    • Chemistry
    • Application Method
      • Dispenser - machine metering, dispensing equipment
    • Cure Method
      • 2-Part Cure - Resin/Hardener
    • Color
      • Black
    • Key Specifications
      • RoHS (Restriction of Hazardous Substances) - Comply with Directive 2011/65/EU
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94: V0 - UL94 V-0
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25 Test Method
    Cure Time (min) 1,440 to 2,160 Test Method
    Viscosity (cPs) 6,900 Test Method
    Fixture or Handling Strength Time (min) Excellent
    Set Time (min) 16 to 30 Test Method
    Linear Shrinkage (%) 0.00001 (in/in)
    Work / Pot Time (min) Short, 15 to 18 Test Method
    Mix Ratio 100:40 (by volume), 100:25 (by weight)
    Bond Strength
    Tensile Strength (psi) 4,880
    Conductivity
    Dissipation Factor 0.03600, 0.02400, 0.01600 Test Method
    Filler non-abrasive
    Dielectric Strength (V/mil) 493 (vpm) Test Method
    Dielectric Constant 4.34, 4.18, 3.80 Test Method
    Thermal Conductivity (W/m°K) 0.50
    Volume Resistivity (O) 4.6e14 (ohm/cm) Test Method
    Surface Resistivity (O) 2.2e15 (ohms) Test Method
    Hardness
    Shore D Hardness 80 to 85
    Elongation (%) 3
    Flexibility Flexible
    Business Information
    Shelf Life Details CONAPOXY® FR-1820 has a shelf life of 12 months from date of manufacture when stored in the original unopened containers at 70°F-85°F. CONAPOXY® FR-1820 Part A and Part B contain filler which may settle during storage. It is recommended that both components be thoroughly mixed before use.
    Shelf Life Temperature (°F) 158 to 185
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 12
  • Best Practices for Elantas (Altana) FR-1820

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) FR-1820

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Elantas (Altana) - FR-1820

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

Epoxies in the Aerospace Industry

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
25°C @ 25°C for maximum properties
Cure Time Test Methods
Cure Time Test Method
1,440 to 2,160 min @ 25°C for maximum properties
Set Time Test Methods
Set Time Test Method
16 to 30 min (150 gm mass)
Viscosity Test Methods
Viscosity Temperature
6,900 cPs 25°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
Short
15 to 18 min @ 25°C to reach 100,000 cps, 150 gm mass, minutes 25°C
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.34 25°C Dielectric Constant @ 100 Hz
4.18 25°C Dielectric Constant @ 1 KHz
3.80 25°C Dielectric Constant @ 1 MHz
Dielectric Strength Test Methods
Dielectric Strength Temperature
493 (vpm) 25°C
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.03600 25°C Dissipation Factor @ 100 Hz
0.02400 25°C Dissipation Factor @ 1 KHz
0.01600 25°C Dissipation Factor @ 1 MHz
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
4.6e14 (ohm/cm) 25°C
Surface Resistivity Test Methods
Surface Resistivity Temperature
2.2e15 (ohms) 25°C
;