3M Novec Flux Remover

CONTACT REP

Description for 3M Novec Flux Remover

It uses advanced 3M solvent technology to remove a wide variety of solder fluxes used in electronics manufacturing and repair – including rosin-based and many no-clean and lead-free fluxes. Novec Flux Remover evaporates quickly, and leaves no residue.

*See Terms of Use Below

Application Type	Flux Remover
1 Part or 2 Part	1-Part
Material Form	Liquid
Substrate	HDPE, C.E. Phenolic, Nylon, most plastics, PVC, PTFE
Industry	to remove a wide variety of solder fuxes used in electronics manufacturing and repair - including rosin-based and many no-clean and lead-free fuxes
Manufacturer	3M
Chemistry	Uses advanced 3M Solvent technology, Free of hydrochlorofuorocarbons (HCFCs), Free of hazardous air pollutants (HAPs), Free of hydrofuorocarbons (HFCs), Free of n-propyl bromide (nPB)
Cure Method	Air dry, Solvent
Cure Time (min)	Fast
Key Specifications	NSF, RoHS, WEEE Compliant

Best Practices for 3M Novec Flux Remover

Register for FREE to view more details

Why register?

View Technical Details
View Test Methods
View Key Specifications
View Similar Materials
Save your Project Searches

See what Gluespec offers

Sign up now Already registered? Sign in!

Email: *

Password: *

Confirm Password: *

Do you prefer to see data in °F or °C?

First Name: *

Last Name: *

Phone: *

Company Name: *

Address: *

Postal Code: *

Country: *

Job Function: *

Industry: *

Describe: *

I agree to the terms of use *

*: Required

Technical Data for 3M Novec Flux Remover

*See Terms of Use Below

Overview

Application Type
- Cleaner/Debonder/Remover – For Cured Materials - Flux Remover
1 Part or 2 Part
- 1-Part
Material Form
- Liquid
Substrate
- Plastic - most plastics
- Polyethylene (LDPE, HDPE) - HDPE
- Phenolic - C.E. Phenolic
- Nylon
- Polyvinyl chloride (PVC) - PVC
- Fluorosilicone Rubber (FVMQ) - PTFE
- Other - CDPE, POM, PP
Industry
- Electronics - to remove a wide variety of solder fuxes used in electronics manufacturing and repair - including rosin-based and many no-clean and lead-free fuxes
Chemistry
- Non-hazardous - Free of hazardous air pollutants (HAPs)
- Solvent-Based - Uses advanced 3M Solvent technology
- Other - Free of n-propyl bromide (nPB), Free of hydrofuorocarbons (HFCs), Free of hydrochlorofuorocarbons (HCFCs)
Cure Method
- Room Temperature / Air Dry - Air dry
- Solvent
Key Specifications
- National Sanitation Foundation - NSF
- RoHS (Restriction of Hazardous Substances) - RoHS
- WEEE (Waste in Electrical and Electronic Equipment Directive) - WEEE Compliant

Specifications

Cure Specs

Cure Time (min)	Fast

Conductivity

Dielectric Strength (V/mil)	>25 (KV)

Other Properties

Specific Gravity	1.30 (g/ml)

Business Information

Shelf Life (mon)	61

Not Good For

Don't Use With	acrylics, polycarbonates, ABS, PS, Lexan, PMMA, PS

Best Practices

Best Practices information currently not available.
Comparable Materials for 3M Novec Flux Remover

*See Terms of Use Below

Spec Engine^® Results
- Dynasolve 185(Versum (formerly Dynaloy))
  Solvent for deflashing, depotting, deinking, and other epoxy removal. It will disintegrate many epoxy-molded devices including UV-cured and amine-cured epoxies.
- AST Contact Cleaner Non-Flammable(Anti-Seize Technology)
  Anti-Seize Technology AST Contact Cleaner Non-Flammable is a 1-Part Solvent Non Toxic Aerosol used to Debond and Remove Most plastics
- Max-Kleen Tri-V Electronics Cleaner(Chemtronics (ITW))
  It is ideal for removal of all types of soils from electronic circuits and relays. It does not contain any n-propyl bromide, TCE, any hazardous air pollutants or ozone depleting compounds.
- Compare All
Closest Results from this Manufacturer
- Rite-Lok Instant Adhesive Debonder AC68(3M)
  Attacks and dissolves cured instant adhesives. It is formulated to have a relatively low evaporation rate and can be used to debond misaligned parts, clean up excess cyanoacrylate adhesive, and remove spilled instant adhesive from work areas.
- Compare All