Application Type Remove, Liquid Cleaner, Substrate Cleaner 1 Part or 2 Part 1 Part Material Form Liquid Substrate Plastic, Rubber Manufacturer 3M Chemistry Toluene aliphatic blend, n-Hexane, Solvent-based, Petroleum distillate, Toluene Cure Method Solvent Density (g/cm³) 6.3 to 6.7 (weight (lbs/gal)) Can Be Used In Conjunction With These Materials Oil Soluble Adhesives
Technical Data for 3M Solvent No. 2
- Cleaner – For Uncured Materials - Liquid Cleaner
- Cleaner – For Substrates - Substrate Cleaner
- Cleaner/Debonder/Remover – For Cured Materials - Remove
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
Can Be Used In Conjunction With These Materials
- Other - Oil Soluble Adhesives
Flash Point (°F) -13.0 Density (g/cm³) 6.3 to 6.7 (weight (lbs/gal))
Shelf Life Details Storage: Store product at 60-80°F (15-27°C) for maximum storage life.;Shelf Life: When stored in the original, unopened container at the recommended storage conditions, these products have a shelf life of 24 months. Shelf Life Temperature (°F) 59 to 81 Shelf Life (mon) 24
Not Good For
Don't Use With Plastic, rubber, painted surfaces
Best Practices for 3M Solvent No. 2
Remove all foreign material, oil, dirt by wiping with a clean cloth moistened with 3M™ Scotch-Grip™ Solvent No. 3. Wipe surface dry with a clean, dry cloth. NOTE: This solvent may attack plastic, rubber or painted surface. Be sure to test for compatibility with surface before proceeding.
Cleaning: Cleanup excess adhesive, coating or sealer with suggested 3M™ Scotch-Weld™ Solvent. Clean application equipment immediately after use and wipe dry. In some cases, it may be necessary to soak parts overnight.
NOTE: These solvents may attack certain types of plastic or rubber. Test for compatibility before using.
Comparable Materials for 3M Solvent No. 2
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.