Bostik Ultimate Adhesive Remover

Bostik Ultimate Adhesive Remover Datasheet
CONTACT REP

  • Description for Bostik Ultimate Adhesive Remover

    A readily biodegradable, low odor, water rinseable solution. Use Ultimate™ to remove wet and cured urethane adhesive from the surface of pre-finished (non-wax) wood flooring.

    *See Terms of Use Below

    Application Type Remover, Cleaning Compound, Adhesive
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate Wood
    Manufacturer Bostik
    Chemistry Biodegradeable
    Odor Details Low odor
    Color Light yellow
    Can Be Used In Conjunction With These Materials Urethanes

  • Technical Data for Bostik Ultimate Adhesive Remover

    *See Terms of Use Below

    Overview
    • Application Type
      • Cleaner – For Uncured Materials - Cleaning Compound
      • Cleaner/Debonder/Remover – For Cured Materials - Remover
      • Adhesive
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
    • Chemistry
      • Other - Biodegradeable
    • Application Method
      • Brush - Dry, clean, non-abrasive cloth, Pre-Soaked towels
    • Cure Method
      • None
    • Color
      • Yellow - Light yellow
    • Can Be Used In Conjunction With These Materials
      • Urethanes
    Specifications
    Cure Specs
    Odor Details Low odor
    Other Properties
    Flash Point (°F) 205.0
    Business Information
    Shelf Life Details Store Ultimate Adhesive Remover in a clean, dry area. Shelf life is one year from date of manufacturing.
    Shelf Life Type From date of manufacturing
    Shelf Life (mon) 12
    Not Good For
    Don't Use With floor boards.

  • Best Practices for Bostik Ultimate Adhesive Remover

    *See Terms of Use Below

    1. Application

      APPLICATION (LIQUID FORMULATION): Apply remover to a dry, clean, non-abrasive cloth.

      Using the dampened cloth, wipe area of the floor that has cured or wet adhesive.

      APPLICATION (PRE-SOAKED TOWELS): Open lid and pull out towels.

      Rub area of the floor that has cured or wet adhesive using a presoaked towel.

    2. Curing

      If adhesive has cured for more than two days, apply a small amount of Ultimate Urethane Remover directly on the adhesive and let it stand approximately 5 minutes.

      If adhesive has cured for more than two days, lay a towel over cured adhesive and let it stand for approximately 5 minutes.

    3. Clean-Up

      Wipe area clean with a dry cloth.

      Wipe area clean with a fresh towel.

  • Comparable Materials for Bostik Ultimate Adhesive Remover

    *See Terms of Use Below

    Spec Engine® Results

    • Bostik
      BOSC132-59(Bostik)

      A water-dispersible aliphatic polyisocyanate. When added to reactive aqueous polymeric dispersions, such as polyurethanes, polychloroprenes and acrylics, Boscodur 132 will react under ambient conditions to increase molecular weight, thereby improving the resistance of the adhesive bonds to moisture, heat, chemicals and solvents.

    • Dow
      PMX-561 Transformer Liquid(Dow)

      Meets the requirements of both IEC 836 and ASTM D 4652-92; High oxidation resistance; Good electrical properties.

    • Bostik
      BOSC80-GA-73(Bostik)

      A solvent-free, water dispersible aliphatic polyisocyanate.

    • Compare All
  Download Technical Data Sheet   Save This Material Saved Items

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. 2ae65dac-2f54-4ab5-8d0e-24258109fef7
  2. 2ae65dac-2f54-4ab5-8d0e-24258109fef7
Submit

Popular Articles

Testing the effectiveness of surface treatments

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Lightweighting drives automotive adhesives demand

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?