Bostik Simson ISR 70-07

Bostik Simson ISR 70-07 Datasheet
  • Description for Bostik Simson ISR 70-07

    Solvent free, low viscosity; sprayable sealant; contributes to corrosion protection; can obtain a rough or fine spray structure.

    Note: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.

    *See Terms of Use Below

    Application Type Coat, Seal
    1 Part or 2 Part 1 Part
    Material Form Paste
    Substrate Copper, Glass, Aluminium, Brass, Zinc, Polyester, PVC, Galvanished steel, Stainless Steel, Painted and lacquered wood, Metal, Powder coated metal
    Industry Automotive
    Manufacturer Bostik
    Chemistry SMP (Silyl Modified Polymer), PVC-free, Isocyanate-free, Solvent-free
    Cure Method Moisture
    Cure Temperature (°C) 20
    Cure Time (min) Fast, >1,440
    Viscosity (cPs) Low
    Color Black, Gray
    High Temperature Resistance (°C) 100
    Low Temperature Resistance (°C) -40
  • Technical Data for Bostik Simson ISR 70-07

    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Paste
    • Substrate
    • Industry
      • Other Transportation - Coach, Coating Car wings, boots and bonnets
      • Automotive
      • Industrial - Overlapping seams, Sealing Narrow seams, Sealing Small holes, Vibration reducing, Welded seams
      • Construction - Constuction
    • Chemistry
      • Solvent-Free - PVC-free, Isocyanate-free
      • Silyl Modified Polymer (SMP) / MS Polymer - SMP (Silyl Modified Polymer)
    • Application Method
      • Dispenser - Air-pressure gun
      • Spray
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    • Color
      • Black
      • Gray
    Cure Specs
    Application Temperature (°F) 41 to 95
    Cure Temperature (°C) 20 Test Method
    Cure Time (min) Fast, >1,440 Test Method
    Viscosity (cPs) Low
    Tack Free Time (min) 30 Test Method
    Green Strength Time (min) ca. 35(pa) Test Method
    Bond Strength
    General Bond Strength (psi) Good
    Shear Strength (psi) 160 Test Method
    Tensile Strength (psi) 160, 220 Test Method
    Material Resistance
    UV Resistance Excellent, Very Good
    Environmental Resistance Excellent
    High Temperature Resistance (°C) 100
    Low Temperature Resistance (°C) -40
    Moisture/Humidity Resistance Moisture/humidity resistance
    Shore A Hardness 45 Test Method
    Elongation (%) 175 Test Method
    Flexibility Permanently elastic
    Other Properties
    Specific Gravity ca. 1.4 (g/ml)
    Flash Point (°F) 200.0
    % Solids (%) 100
    Business Information
    Shelf Life Details Simson ISR 70-07 may be stored for 18 months (in cartridges) in a closed (unopened) container in a dry place at temperatures between 41°F to 86°F (+5°C to +30°C).
    Shelf Life Temperature (°F) 41 to 86
    Shelf Life (mon) 18
    Not Good For
    Don't Use With untreated polyethylene, polypropylene, teflon.
  • Best Practices for Bostik Simson ISR 70-07

    *See Terms of Use Below

    1. Application

      Simson ISR 70-07 is sprayed by means of an appropriate air pressure gun with adjustable nozzle at a distance of 98-131 feet (30-40m) from the object. By adjusting the nozzle and the air pressure it is possible to obtain a smoother (orange peel) or a rougher structure. It is recommended to make a small trial first, so that the proper combination of nozzle and pressure can be determined in order to obtain the desired final result.

  • Comparable Materials for Bostik Simson ISR 70-07

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. cacfb873-47be-4e10-bb13-e9f77afe68f0
  2. cacfb873-47be-4e10-bb13-e9f77afe68f0

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Find the right chemistry to protect your printed circuit board components

Read Article

Silicones in LED Lighting | Gluespec

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
20°C Curing speed after 24 hours, 0.079 in, ca. 2 mm, 70°F/20°C @ 50% R.H.
Cure Time Test Methods
Cure Time Test Method
>1,440 min Curing speed after 24 hours, 0.079 in, ca. 2 mm, 70°F/20°C @ 50% R.H.
Green Strength Time Test Methods
Green Strength Time Test Method
ca. 35(pa) Physical Rheometer MC100
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
30 min 20°C 70°F/20°C @ 50% R.H., ca.
Shear Strength Test Methods
Shear Strength Substrate Test Method
160 psi Aluminum-to-Aluminum DIN 53283/ASTM D1002, Shear stress, adhesive thickness 2mm, test speed 50 mm/min.
Tensile Strength Test Methods
Tensile Strength Test Method
160 psi Tensile stress, 100%, DIN 53504/ISO 37
220 psi Tensile stress @ break, DIN 53504/ISO 37
Elongation Test Methods
Elongation Test Method
175 % DIN 53504/ISO 37, at Break
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
45 DIN 53505