Elantas (Altana) Conap CE-1171

Elantas (Altana) Conap CE-1171 Datasheet
  • Description for Elantas (Altana) Conap CE-1171

    A single-component acrylic conformal coating that has been formulated in Rule 66 exempt solvents. Provides fast drying time and reparability as well as to providing humidity resistance and hydrolytic stability. Cured films maintain excellent adhesion to phenolic and epoxy glass laminates even in adverse environmental conditions.

    *See Terms of Use Below

    Brand Conap, Cytec
    Application Type Conformal Coat, Bond
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate Epoxy, Phenolic, Glass
    Industry components, Electrical, Electronics, Printed circuitry
    Manufacturer Elantas (Altana)
    Chemistry Acrylic
    Cure Method Solvent
    Cure Temperature (°C) 25, 60
    Cure Time (min) 1,440, 60, Fast
    Viscosity (cPs) 900
    Color Slight Haze, low luster, Amber, Slight Haze, Slight Haze, low luster
    Fungus Resistance Fungus resistance
    High Temperature Resistance (°C) 125
    Low Temperature Resistance (°C) -65
    Key Specifications IPC-CC-830B, UL Recognized, Mil-Spec (United States Military Standard): I-46058-C: MIL-STD-810B; MIL-I-46058C, Type AR, Mil-Spec (United States Military Standard): MIL-STD-810B; MIL-I-46058C, Type AR
  • Technical Data for Elantas (Altana) Conap CE-1171

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Electronics - components, Electrical, Printed circuitry
    • Chemistry
    • Application Method
      • Brush
      • Spray
      • Dip
    • Cure Method
      • Solvent
    • Color
      • Clear / Transparent - Slight Haze, low luster
      • Off-White - Slight Haze, low luster
      • Red - Amber, Slight Haze
    • Key Specifications
      • IPC (Association Connecting Electronics Industries) - IPC-CC-830B
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) - UL Recognized
      • Mil-Spec (United States Military Standard): I-46058-C: Type AR - MIL-STD-810B; MIL-I-46058C, Type AR
      • Mil-Spec (United States Military Standard): STD-810B - MIL-STD-810B; MIL-I-46058C, Type AR
    • Brand
      • Conap
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 60
    Cure Time (min) 1,440, 60, Fast
    Viscosity (cPs) 900 Test Method
    Tack Free Time (min) 20, 15 Test Method
    Work / Pot Time (min) Indefinate
    Bond Strength
    General Bond Strength (psi) Excellent
    Material Resistance
    Flame Resistance Flame resistance
    Fungus Resistance Fungus resistance
    High Temperature Resistance (°C) 125
    Low Temperature Resistance (°C) -65
    Conductivity
    Dissipation Factor 0.01000 Test Method
    Insulation Resistance (O) >1.5e13 (ohms), Insulation resistance, 2.5e10 (ohms), 1.0e13 (ohms) Test Method
    Dielectric Strength (V/mil) 1500 V.A.C. Test Method
    Dielectric Constant 2.50 to 3.00 Test Method
    Volume Resistivity (O) 2.5e15 (ohms/cm) Test Method
    Hardness
    Flexibility Excellent, Flexibility - No cracking or crazing in bend over 1/8" diameter mandrel Test Method
    Other Properties
    Specific Gravity 0.980 Test Method
    Flash Point (°F) 64.4 Test Method
    % Solids (%) 30
    Business Information
    Shelf Life Details Maintain containers at temperatures of 149°C-185°C(65°F-85°F) and keep securely closed when not in use. CONAP CE-1171 has a shelf life of 18 months from date of manufacture when stored in original, unopened containers at 149°C-185°C(65°F-85°F.)
    Shelf Life Temperature (°F) 65 to 85
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) Conap CE-1171

    *See Terms of Use Below

    1. Application

      CONAP® CE-1171 is a high performance conformal coating specifically designed as an electrical insulating coating for printed circuitry and components. The ultimate performance of the cured film is dependent on process controls used in application of coating. Cleanliness of substrate is a major factor in promoting adhesion and preventing under-film corrosion. Assemblies must be clean, oil-free, and dry. For specific information, please contact your local Cytec Industries Inc. Regional Sales Manager or request Technical Bulletin C-115 Cytec's Customer Service Department.

      CE-1171 may be applied by spraying, dipping, or brushing. If viscosity reduction is desired, dilution of 10-20% by weight with CONAP® S-22 solvent is recommended for most applications. S-22 Solvent meets Rule 66 exemption criteria.

      PLEASE NOTE: For spray applications, dilution up to 1 to 1 by volume may be necessary to avoid cobwebbing.

      CE-1171 may be sprayed with most conventional air spray equipment.

      Two coats are recommended for optimum protection. A total cured film thickness of 2 ± 1 mil is recommended. CE-1171 may be re-coated, if desired, after the previous film is tack-free.

  • Comparable Materials for Elantas (Altana) Conap CE-1171

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. b633b8a8-c9b5-444a-9481-071ae96c753b
  2. b633b8a8-c9b5-444a-9481-071ae96c753b

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Silicones in LED Lighting | Gluespec

Read Article

Testing the effectiveness of surface treatments

Read Article

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature
20 min 25°C
15 min 60°C
Viscosity Test Methods
Viscosity Test Method Temperature
900 cPs Brookfield Viscosity @ 25°C, cps 25°C
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
2.50 to 3.00 25°C Dielectric Constant @ 100 Hz
Dielectric Strength Test Methods
Dielectric Strength Test Method
1500 V.A.C. No flashoer or breakdown (1500 VAC)
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.01000 25°C Dissipation Factor @ 100 Hz
Insulation Resistance Test Methods
Insulation Resistance Temperature Test Method
>1.5e13 (ohms) 25°C Initially @ 25°C and 50% R.H, 2.0 mil film
Insulation resistance 65°C After 10 Days @ 65°C and 95% R.H, 2.0 mil film
2.5e10 (ohms) 25°C After conditioning 24 hours @ 25°C and 50% R.H, 2.0 mil film
1.0e13 (ohms)
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
2.5e15 (ohms/cm) 25°C
Flexibility Test Methods
Flexibility Test Method
Excellent Flexibility Test Method
Flexibility - No cracking or crazing in bend over 1/8" diameter mandrel MIL-I-46058C
Flash Point Test Methods
Flash Point Test Method
18.0°C Closed Cup
Specific Gravity Test Methods
Specific Gravity Temperature
0.980 25°C