Elantas (Altana) Conathane CE-1175

Elantas (Altana) Conathane CE-1175 Datasheet
  • Description for Elantas (Altana) Conathane CE-1175

    A single-component water based polyurethane conformal coating. Designed for thin film applications, and developed specifically to provide the ultimate in humidity resistance and hydrolytic stability. Maintains excellent adhesion to phenolic and epoxy glass laminates even in adverse environmental conditions.

    *See Terms of Use Below

    Brand Conathane, Cytec
    Application Type Conformal Coat, Bond
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate Epoxy, Phenolic, Glass
    Industry components, Electrical, Printed circuitry
    Manufacturer Elantas (Altana)
    Chemistry Polyurethane, Water-based
    Cure Method Heat
    Cure Temperature (°C) 60, 85, 100, 25, 25, 25
    Cure Time (min) 240, 180, 120, 4,320 to 7,200, 1,440 to 2,880, 1,440
    Viscosity (cPs) <500
    Color Translucent Amber, Clear, Translucent Amber
    Fungus Resistance Fungus resistance
    Chemical Resistance Good
    Relative Solvent Resistance Chemical Resistance: Good solvent resistance
    High Temperature Resistance (°C) 260
    Low Temperature Resistance (°C) -65
    Key Specifications IPC-CC-830B, UL Recognized, Mil-Spec (United States Military Standard): MIL-E-5272C; MIL-STD-810B; MIL-I-46058C, TYPE UR, Mil-Spec (United States Military Standard): I-46058-C: MIL-E-5272C; MIL-STD-810B; MIL-I-46058C, TYPE UR
  • Technical Data for Elantas (Altana) Conathane CE-1175

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Electronics - components, Electrical, Printed circuitry
    • Application Method
      • Brush
      • Spray
      • Dip
    • Cure Method
      • Heat
    • Color
      • Translucent - Translucent Amber
      • Clear / Transparent - Clear
      • Red - Translucent Amber
    • Key Specifications
      • IPC (Association Connecting Electronics Industries) - IPC-CC-830B
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) - UL Recognized
      • Mil-Spec (United States Military Standard): E-5272C - MIL-E-5272C; MIL-STD-810B; MIL-I-46058C, TYPE UR
      • Mil-Spec (United States Military Standard): I-46058-C: Type UR - MIL-E-5272C; MIL-STD-810B; MIL-I-46058C, TYPE UR
      • Mil-Spec (United States Military Standard): STD-810B - MIL-E-5272C; MIL-STD-810B; MIL-I-46058C, TYPE UR
    • Brand
      • Conathane
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 60, 85, 100, 25, 25, 25
    Cure Time (min) 240, 180, 120, 4,320 to 7,200, 1,440 to 2,880, 1,440
    Viscosity (cPs) <500 Test Method
    Tack Free Time (min) 20 to 30 Test Method
    Work / Pot Time (min) Indefinate
    Thixotropic Non Flow
    Bond Strength
    General Bond Strength (psi) Excellent
    Tensile Strength (psi) 5,000
    Material Resistance
    Flame Resistance Flame resistance
    Fungus Resistance Fungus resistance
    Chemical Resistance Good
    Relative Solvent Resistance Chemical Resistance: Good solvent resistance
    High Temperature Resistance (°C) 260
    Low Temperature Resistance (°C) -65
    Conductivity
    Insulation Resistance (O) 1.5e14 (ohms), 2.9e10 (ohms), 4.5e10 (ohms), 6.3e10 (ohms), 6.5e10 (ohms), 3.2e12 (ohms), Insulation resistance Test Method
    Dielectric Strength (V/mil) 1500 VAC Test Method
    Hardness
    Flexibility Excellent, Flexibility - No cracking or crazing in bend over 1/8" diameter mandrel Test Method
    Other Properties
    Specific Gravity 1.100 Test Method
    % Solids (%) 32
    Business Information
    Shelf Life Details CONATHANE CE-1175 must be stored in tightly closed containers to prevent evaporation of water and the introduction of foreign matter, which can adversely affect process ability. In order to maintain product uniformity - PROTECT FROM FREEZING.;CONATHANE® CE-1175 has a shelf life of 15 months from the date of manufacture when stored in original unopened containers at 65°F-85°F.
    Shelf Life Temperature (°F) 65 to 85
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 15
  • Best Practices for Elantas (Altana) Conathane CE-1175

    *See Terms of Use Below

    1. Application

      CONATHANE CE-1175 is a high-performance conformal coating specifically designed as an electrical insulating coating for printed circuitry and components. The ultimate performance of the cured film is dependent on process controls used in application of the coating. Cleanliness of the substrate is a major factor in promoting adhesion and preventing under-film corrosion. Assemblies must be clean, oil-free, and dry. For specific applications, please contact your local Cytec Industries Inc. Sales Engineer or request Technical Bulletin C-115.

      CONATHANE CE-1175 may be applied by spraying, dipping, or brushing. If viscosity reduction is desired, dilutions of 10%-100% by weight with de-ionized or distilled water are recommended for most applications. CONATHANE CE-1175 has excellent dip tank stability, and with proper dilution it can be sprayed with most conventional air spray equipment.

      Two coats are recommended for optimum protection. A total cured film thickness of 3 ± 2 mils is recommended. CONATHANE CE-1175 may be recoated, if desired, after the previous film is tack-free.

  • Comparable Materials for Elantas (Altana) Conathane CE-1175

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Questions about this material?

Elantas (Altana) - Conathane CE-1175

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

What Are the Differences Between Adhesives and Sealants?

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Glob Top encapsulation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
20 to 30 min 25°C 25°C, 50% R.H.
Viscosity Test Methods
Viscosity Test Method Temperature
<500 cPs Brookfield Viscosity @ 25°C, cps 25°C
Dielectric Strength Test Methods
Dielectric Strength Test Method
1500 VAC No flashoer or breakdown BEFORE or AFTER thermal shock and moisture resistance cycling.( 1500 VAC)
Insulation Resistance Test Methods
Insulation Resistance Temperature Test Method
1.5e14 (ohms) 25°C Initial (25°C - 50% R.H.), 2.0 mil film
2.9e10 (ohms) 65°C 1st Cycle (65°C - 95% R.H.), 2.0 mil film
4.5e10 (ohms) 65°C 4th Cycle (65°C - 95% R.H.), 2.0 mil film
6.3e10 (ohms) 65°C 7th Cycle (65°C - 95% R.H.), 2.0 mil film
6.5e10 (ohms) 65°C 10th Cycle (65°C - 95% R.H.), 2.0 mil film
3.2e12 (ohms) 25°C 24 Hours after 10th Cycle (25N C - 50% R.H.), 2.0 mil film
Insulation resistance
Flexibility Test Methods
Flexibility Test Method
Excellent Flexibility Test Method
Flexibility - No cracking or crazing in bend over 1/8" diameter mandrel MIL-I-46058C
Specific Gravity Test Methods
Specific Gravity Temperature
1.100 25°C
;