Elantas (Altana) Conathane EN-16 Datasheet Elantas (Altana) Conathane EN-16

Information provided by Gluespec
  • Description for Elantas (Altana) Conathane EN-16

    A two-component polyurethane potting compound & encapsulant, unfilled, room temperature curing, 100%-solids.

    *See Terms of Use Below

    Brand Cytec, Conathane
    Application Type Conformal Coating, Potting, Molding, Encapsulating
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Substrate Polyvinyl chloride, Neoprene, Metals
    Industry Watertight electrical connectors, Cables, Cable end seals
    Manufacturer Elantas (Altana)
    Chemistry Polyurethane, Polyether-based
    Cure Method 2-Part Cure, Room temperature curing
    Cure Temperature (°C) 25, 80, 20 to 25 Room temperature
    Cure Time (min) 10,080, 960
    Viscosity (cPs) 4,000
    Color Amber
    Fungus Resistance Fungus Resistance, Non-nutrient for fungus
    Arc Resistance (sec) Arc Resistance
    Chemical Resistance Excellent resistance to oils, Excellent resistance to gasoline, Excellent resistance to JP-4 fuel, Excellent resistance to seawater
    High Temperature Resistance (°C) Thermal shock resistant
    Key Specifications Comply with Directive 2011/65/EU, Mil-Spec (United States Military Standard): Conforms to MIL-M-24041C: PRO 20

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Conformal Coatings

Read Article

Glob Top encapsulation

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Request Quote: Elantas (Altana) Conathane EN-16

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Viscosity Test Methods
Viscosity Test Method Temperature
4,000 cPs Initial 25°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
30 min (1 lb. Mass) 25°C
Tensile Strength Test Methods
Tensile Strength Cure Temperature Test Method
4,220 psi 25°C ASTM D412
720 psi 25°C 100% modulus, ASTM D412
1,300 psi 25°C 300% modulus, ASTM D412
Tear Strength Test Methods
Tear Strength Cure Temperature Test Method
420 (pli) 25°C ASTM D624
Compressive Strength Test Methods
Compressive Strength Type Test Method
44 (%) Compression Set Method B, ASTM D395
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
6.60 25°C 100 Hz, ASTM D150
6.40 25°C 1 kHz, ASTM D150
4.90 25°C 1 MHz, ASTM D150
Dielectric Strength Test Methods
Dielectric Strength Temperature Test Method
480 V/mil 25°C 1/16”, ASTM D149
Electrical Insulation
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.03000 25°C 100 Hz, ASTM D150
0.03000 25°C 1 kHz, ASTM D150
0.08000 25°C 1 MHz, ASTM D150
Insulation Resistance Test Methods
Insulation Resistance Temperature Test Method
Insulation Resistance
1.5e11 (ohms) 25°C MIL-M-24041C
Volume Resistivity Test Methods
Volume Resistivity Temp (°C) Test Method
1.4e12 (ohm-cm) 25°C ASTM D257
Surface Resistivity Test Methods
Surface Resistivity Temperature Test Method
1.7e14 (ohms / sq.) 25°C ASTM D257
Elongation Test Methods
Elongation Test Method
510 % ASTM D412, Ultimate, 25°C / 77°F
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method Hardness Temperature
80 ASTM D2240 25°C