Shinetsu MR-COAT-01F Datasheet Shinetsu MR-COAT-01F

Information provided by Gluespec
  • Description for Shinetsu MR-COAT-01F

    Shinetsu MR-COAT-01F is a 1 Part Condensation Silicone resin based Liquid used to Conformal Coat General metals

    *See Terms of Use Below

    Application Type Conformal coating
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate General metals
    Industry All around coating, Printed circuit boards
    Manufacturer Shinetsu
    Chemistry Silicone resin based
    Cure Method Condensation, Room Temperature Cure (Alcohol)
    Cure Temperature (°C) 23 Room Temperature
    Cure Time (min) Fast, 10,080
    Viscosity (cPs) Low, 70
    Color Transparent
    Chemical Resistance Good for water-proof coating
  • Technical Data for Shinetsu MR-COAT-01F

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Electronics - All around coating
      • Printed Circuit Board (PCB) - Printed circuit boards
    • Chemistry
    • Application Method
      • Brush
      • Spray - Sprayed
      • Flow
      • Dip - Dipped
    • Cure Method
      • Room Temperature / Air Dry - Room Temperature Cure (Alcohol)
      • Moisture / Condensation Cure - Condensation
    • Color
      • Clear / Transparent - Transparent
    Specifications
    Cure Specs
    Cure Temperature (°C) 23 Room Temperature Test Method
    Cure Time (min) Fast, 10,080 Test Method
    Viscosity (cPs) Low, 70 Test Method
    Bond Strength
    Tensile Strength (psi) 1.9 (MPa) Test Method
    Material Resistance
    Non-Corrosive Non-corrosive
    Chemical Resistance Good for water-proof coating
    Moisture/Humidity Resistance Good for moisture proof coating
    Conductivity
    Dissipation Factor 0.00200 Test Method
    Dielectric Strength (V/mil) Excellent electrical properties, 25 (kV/mm) Test Method
    Volume Resistivity (O) 10 (TO·m) Test Method
    Hardness
    Shore A Hardness 55 Test Method
    Elongation (%) Superior, 280 Test Method
  • Best Practices

    Best Practices information currently not available.
  • Comparable Materials for Shinetsu MR-COAT-01F

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Testing the effectiveness of surface treatments

Read Article

In Depth Questions and Answers on UV/Light Cure Adhesives

Read Article

Silicones in LED Lighting | Gluespec

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

402 Materials
View Shinetsu Catalog >

Request Quote: Shinetsu MR-COAT-01F

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
23°C Room Temperature 50%RH, Values are not for specification purposes
Cure Time Test Methods
Cure Time Test Method
Fast
10,080 min 50%RH, Values are not for specification purposes
Viscosity Test Methods
Viscosity Test Method
Low
70 cPs Values are not for specification purposes
Tensile Strength Test Methods
Tensile Strength Test Method
1.9 (MPa) Values are not for specification purposes
Dielectric Strength Test Methods
Dielectric Strength Test Method
Excellent electrical properties
25 (kV/mm) Values are not for specification purposes
Dissipation Factor Test Methods
Dissipation Factor Test Method
0.00200 Dielectric Dissipation Factor, Values are not for specification purposes
Volume Resistivity Test Methods
Volume Resistivity Test Method
10 (TO·m) Values are not for specification purposes
Elongation Test Methods
Elongation Test Method
Superior
280 % Values are not for specification purposes
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
55 Values are not for specification purposes