Application Type Lamination, Bond 1 Part or 2 Part 1 Part Material Form Liner Industry Lamination Manufacturer 3M Chemistry 70# Densified Kraft Cure Method Pressure Sensitive Key Specifications TSCA (Toxic Substances Control Act)
Technical Data for 3M Secondary Liner 4997
- Laminate - Lamination
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Other - Liner
- Printing and Graphics - Lamination
- Other - 70# Densified Kraft
- Roll - Roller
- Other - Hard-edged plastic tool
- Pressure Sensitive (min) - Pressure Sensitive
- TSCA (Toxic Substances Control Act)
Application Temperature (°F) 60 to 100
Total Thickness (mil) 4
Best Practices for 3M Secondary Liner 4997
Application is not recommended if the surface temperature is below 50°F (10°C) because the adhesive becomes too firm to adhere readily. Once properly applied, at the recommended application temperature, low temperature holding is generally satisfactory.
Comparable Materials for 3M Secondary Liner 4997
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.