Application Type Lubricate 1 Part or 2 Part 1 Part Material Form Liquid Substrate Metal Manufacturer Dow Chemistry Synthetic Wax Cure Method Solvent Cure Temperature (°C) 20 to 25 Cure Time (min) 90 Color Clear Density (g/cm³) 0.840
Technical Data for Dow Metal Protector Plus Wax Solution
Cure Temperature (°C) 20 to 25 Cure Time (min) 90
Flash Point (°F) 82.4 Density (g/cm³) 0.840 Test Method
Shelf Life Details When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 60 months from the date of production. Shelf Life Temperature (°F) <68 Shelf Life Type from the date of production Shelf Life (mon) 60
Best Practices for Dow Metal Protector Plus Wax Solution
Apply to cleaned surfaces by dipping, spraying or painting. Drying time at room temperature approx. 90 minutes. Several coats can be applied to enhance corrosion protection (letting them dry in between). Thinner coatings can be achieved by diluting with white spirit. By virtue of the compatibility of MOLYKOTE Metal Protector Plus with common lubricants, there is usually no need to wash off the film before using the devices/equipment. Should this be necessary, it can be done with white spirit. After use, clean spray can valves by spraying inverted.
Comparable Materials for Dow Metal Protector Plus Wax Solution
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.