Dow Thermal Phase Change Material PC-2500 Datasheet Dow Thermal Phase Change Material PC-2500

CONTACT REP
Information provided by Gluespec

  • Description for Dow Thermal Phase Change Material PC-2500

    Thermally conductive phase change material that melts above 50°C and provides complete wet out of the interface.

    *See Terms of Use Below

    Chemical Resistance Good
    Application Type Thermal Phase Change Material
    1 Part or 2 Part 1-Part
    Material Form Film
    Industry Heat sinks
    Manufacturer Dow
    Chemistry Silicone
    Cure Method Heat
    Color Teal, Teal
    Ozone Resistance Ozone resistance
    High Temperature Resistance (°C) 177
    Low Temperature Resistance (°C) -59, Low
    Volume Resistivity (O) 3.3e15 (ohms/cm), 2.6e14 (ohms/cm)
    Key Specifications UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94: UL 94 V-0

  • Technical Data for Dow Thermal Phase Change Material PC-2500

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance - Good
    • Application Type
      • Phase Change Material - Thermal Phase Change Material
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Film
    • Industry
    • Chemistry
    • Cure Method
      • Heat
    • Color
      • Blue - Teal
      • Green - Teal
    • Key Specifications
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) : UL 94 : V0 - UL 94 V-0
    Specifications
    Material Resistance
    Ozone Resistance Ozone resistance
    UV Resistance UV resistance
    High Temperature Resistance (°C) 177
    Low Temperature Resistance (°C) -59, Low
    Conductivity
    Filler Alumina
    Thermal Conductivity (W/m°K) >7.00, Thermally Conductive
    Volume Resistivity (O) 3.3e15 (ohms/cm), 2.6e14 (ohms/cm) Test Method
    Other Properties
    Specific Gravity 3.100
    Coefficient of Thermal Expansion (CTE) 22 (Linear (micron/m °C or ppm ))
    Business Information
    Shelf Life Details The product should be stored in the original packaging under normal warehouse conditions to maintain the integrity of the packaging materials.

  • Best Practices for Dow Thermal Phase Change Material PC-2500

    *See Terms of Use Below

    1. Clean-Up

      The material can be removed easily and cleanly, with no special tools, for access.

  • Comparable Materials for Dow Thermal Phase Change Material PC-2500

    *See Terms of Use Below

    Spec Engine® Results

    • Shinetsu
      PCS-PL-30(Shinetsu)

      Shinetsu PCS-PL-30 is a 1-Part Heat Silicone Sheet used to Enhance Thermal Performance Metal substrates and Graphite substrates

    • Shinetsu
      PCS-LT-30(Shinetsu)

      Shinetsu PCS-LT-30 is a 1-Part Heat Silicone Sheet used to Enhance Thermal Performance Graphite substrates and Metal substrates

    • Compare All

    Closest Results from this Manufacturer

    • Dow
      WL-5350 Photopatternable Spin-On Silicone(Dow)

      Low temperature thermal cure; high thermal stability; low shrinkage; good moisture resistance; good dielectric properties; negative tone patternable to an aspect ratio less than 1.3 with sloping sidewalls; demonstrated device integration; easily reworkable.

    • Dow
      WL-5150 Photopatternable Spin-On Silicone(Dow)

      Low temperature thermal cure; high thermal stability; low shrinkage; good moisture resistance; good dielectric properties; negative tone patternable to an aspect ratio less than 1.3 with sloping sidewalls; demonstrated device integration; easily reworkable.

    • Dow
      WL-3010 Printable Silicone(Dow)

      Good moisture resistance; high thermal stability; low shrinkage; good dielectric properties.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Electrically Conductive Adhesives

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Dow Thermal Phase Change Material PC-2500

All Dow Materials
View Now
Thermal Interface Materials
View Now
Thermal Phase Change Materials
View Now

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
3.3e15 (ohms/cm) 25°C
2.6e14 (ohms/cm) 90°C