• Description for 3M 8882-A

    A two-part non-urethane encapsulating compound. The encapsulant aggressively adheres to filled cable and is compatible with common plastics used in telephone splice connectors.

    *See Terms of Use Below

    Application Type Encapsulate
    1 Part or 2 Part 2 Part
    Material Form Compound
    Substrate Common plastics
    Industry common plastics used in telephone splice connectors
    Manufacturer 3M
    Chemistry Not Isocyanate based, Nonurethane
    Cure Method 2-Part Cure
    Viscosity (cPs) 670, 2,150
    Color Amber , Transparent

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Which answer best describes a project you are currently working on?
Set Time Test Methods
Set Time Set Temperature Test Method
100 to 110 min 4°C 3M test method (Sunshine Gel Meter)
50 to 70 min 24°C 3M test method (Sunshine Gel Meter)
30 to 40 min 43°C 3M test method (Sunshine Gel Meter)
Viscosity Test Methods
Viscosity Test Method Temperature
670 cPs 4 minutes, 3M test method (Brookfeld Viscometer) 24°C
2,150 cPs 4 minutes, 3M test method (Brookfeld Viscometer) 4°C
Tear Strength Test Methods
Tear Strength Test Temperature Test Method
1.6 (lb./in) 24°C ASTM D624 15 in./min.
Tensile Strength Test Methods
Tensile Strength Cure Temperature Test Method
11 psi 24°C ASTM D412
Elongation Test Methods
Elongation Test Method
300 % ASTM D412 at 75°F (24°C)