Dow HV 1510/30 Datasheet Dow HV 1510/30

CONTACT REP
Information provided by Gluespec

  • Description for Dow HV 1510/30

    Injection moldable; high tear strength; high elongation; fast cure and excellent tracking resistance.

    *See Terms of Use Below

    Application Type Pot, Encapsulate
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Manufacturer Dow
    Chemistry Silicone rubber
    Cure Method Pressure Sensitive, 2-Part Cure, Heat
    Cure Temperature (°C) Elevated temperature, 120, 200, 200
    Cure Time (min) Fast, Rapidly, 10, 240, 0.13 to 0.23
    Viscosity (cPs) 1000 (Pa.s), 285 (mPa.s)
    Other Resistance Tracking resistance
    Volume Resistivity (O) 5e15 (ohms/cm)

  • Technical Data for Dow HV 1510/30

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Chemistry
    • Cure Method
      • Pressure Sensitive (min) - Pressure Sensitive
      • Heat
      • 2-Part Cure
    Specifications
    Cure Specs
    Cure Temperature (°C) Elevated temperature, 120, 200, 200 Test Method
    Cure Time (min) Fast, Rapidly, 10, 240, 0.13 to 0.23 Test Method
    Viscosity (cPs) 1000 (Pa.s), 285 (mPa.s) Test Method
    Work / Pot Time (min) 4,320 Test Method
    Mix Ratio 1:1 (by volume)
    Bond Strength
    Tear Strength (piw) High, 33 (kN/m) Test Method
    Tensile Strength (psi) 1,305 Test Method
    Material Resistance
    Other Resistance Tracking resistance Test Method
    Conductivity
    Dissipation Factor 0.00100 Test Method
    Dielectric Constant 2.80 Test Method
    Volume Resistivity (O) 5e15 (ohms/cm) Test Method
    Hardness
    Shore A Hardness 30 Test Method
    Elongation (%) High, 760 Test Method
    Other Properties
    Specific Gravity 1.130 Test Method
    Flash Point (°F) 212.0
    % Solids (%) 100
    Business Information
    Shelf Life Details When stored at or below 32°C (90°F) in the original unopened containers, this product has a usable life of 6 months from the date of production., The curing agent and base can be sensitive to moisture or contaminants, it is recommended that containers are sealed tightly after use.
    Shelf Life Type from the date of production
    Shelf Life (mon) 6

  • Best Practices for Dow HV 1510/30

    *See Terms of Use Below

    1. Mixing

      Mix parts A and B in a 1:1 ratio. Meter mix equipment which pumps, meters and mixes the two components without the incorporation of air is strongly recommended for production.

      Hand or mechanical mixing can be used but do not mix for an extended period of time or allow the temperature to exceed 35°C (95°F). It is very important to control the B to A ratio very precisely.

    2. Deairing/Degassing

      If air bubbles are entrapped during mixing the mixture must be thoroughly de-gassed under vacuum.

    3. Curing

      DOW CORNING HV 1510/30 cures rapidly at elevated temperatures. A 2mm cross-section requires 8-14 seconds at 200°C (392°F). The cure time depends on the thickness and the cure temperature used. Cure can be inhibited by contact with certain materials such as amines, sulphur and tin complexes.

    4. Clean-Up

      The uncured silicone can readily be removed by most hydrocarbon solvents. Polar solvents, such as ketones and alcohols, are not suitable.

  • Comparable Materials for Dow HV 1510/30

    *See Terms of Use Below

    Spec Engine® Results

    • Dow
      HV 1551/70P(Dow)

      Low viscosity; sustained hydrophobicity; high tear strength; low cure temperature; good tracking resistance.

    • Dow
      HV 1510/40(Dow)

      Injection moldable; high tear strength; high elongation; fast cure and excellent tracking resistance.

    • Dow
      HV 1760/80(Dow)

      Superior wet electrical properties; excellent tracking resistance; sustained hydrophobicity.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Electrically Conductive Adhesives

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Dow HV 1510/30

All Dow Materials
View Now

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
Elevated temperature
120°C Press cured
200°C Post cured
200°C
Cure Time Test Methods
Cure Time Test Method
Fast
Rapidly
10 min Press cured
240 min Post cured
0.13 to 0.23 min
Viscosity Test Methods
Viscosity Test Method
1000 (Pa.s) Y=0.9sª¹, Viscosity measured on the Carrimed CSL Viscometer
285 (mPa.s) Y=10.0s, Viscosity measured on the Carrimed CSL Viscometer
Work / Pot Time Test Methods
Work / Pot Time Temperature
4,320 min 25°C
Tear Strength Test Methods
Tear Strength Test Method
High
33 (kN/m) ASTM D624 B
Tensile Strength Test Methods
Tensile Strength Test Method
1,305 psi ASTM D412
Other Resistance Test Methods
Other Resistance Test Method
Tracking resistance IEC 60587
Dielectric Constant Test Methods
Dielectric Constant Test Method
2.80 IEC 60250, 100 Hz
Dielectric Strength Test Methods
Dielectric Strength Test Method
Dissipation Factor Test Methods
Dissipation Factor Test Method
0.00100 IEC 60250
Volume Resistivity Test Methods
Volume Resistivity Test Method
5e15 (ohms/cm) IEC 60093
Elongation Test Methods
Elongation Test Method
High Elongation Test Method
760 % ASTM D412
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
30 ASTM D2204
Specific Gravity Test Methods
Specific Gravity Test Method
1.130 ASTM D792