Dow Sylgard High Voltage Insulator Coating

CONTACT REP

Description for Dow Sylgard High Voltage Insulator Coating

• High Voltage Insulator Coating • Long-term water repellency/hydrophobicity • Resistance to atmospheric and chemical degradation • Resistance to arcing and corona.

*See Terms of Use Below

Brand	Sylgard
Chemical Resistance	Chemical Resistance: Fluid Resistance: Water erosion
Application Type	Pot, Encapsulate
1 Part or 2 Part	1-Part
Material Form	Liquid, Silicone elastomer
Manufacturer	Dow
Chemistry	Silicone elastomer
Cure Method	RTV
Other Resistance	Corona

Best Practices for Dow Sylgard High Voltage Insulator Coating

Register for FREE to view more details

Why register?

View Technical Details
View Test Methods
View Key Specifications
View Similar Materials
Save your Project Searches

See what Gluespec offers

Sign up now Already registered? Sign in!

Email: *

Password: *

Confirm Password: *

Do you prefer to see data in °F or °C?

First Name: *

Last Name: *

Phone: *

Company Name: *

Address: *

Postal Code: *

Country: *

Job Function: *

Industry: *

Describe: *

I agree to the terms of use *

*: Required

Technical Data for Dow Sylgard High Voltage Insulator Coating

*See Terms of Use Below

Overview

Chemical Resistance
- Chemical Resistance : Fluid Resistance : Water Resistance - Water erosion
Application Type
- Pottant / Encapsulant - Pot, Encapsulate
1 Part or 2 Part
- 1-Part
Material Form
- Elastomer - Silicone elastomer
- Liquid
Chemistry
- Silicone - Silicone elastomer
Application Method
- Brush
- Spray
- Dip
Cure Method
- RTV (Room Temperature Vulcanization) - RTV
Brand
- Sylgard

Specifications

Material Resistance

UV Resistance	UV resistance
Environmental Resistance	Environmental resistance
Other Resistance	Corona

Other Properties

Flash Point (°F)	104.0

Best Practices for Dow Sylgard High Voltage Insulator Coating

*See Terms of Use Below
1. Surface Preparation
  
  Porcelain and glass surfaces should be dry and clean before application. If silicone (or other) grease has been previously used on the insulators, this should be completely removed by wiping and the surface cleaned with isopropyl alcohol before application of the SYLGARD HVIC.
Comparable Materials for Dow Sylgard High Voltage Insulator Coating

*See Terms of Use Below

Spec Engine^® Results
- Dowsil 3140 RTV Coating(Dow)
  • A one part component • Room temperature cure • coating with good flowability • Polydimethylsiloxane adhesive • Pin sealing • self-leveling • solder joint coverage • good flame resistance
- Dowsil SE 9187 L Adhesive(Dow)
  One-part, black, clear (translucent) or white, fast tack-free, controlled volatility adhesive with very low viscosity.
- Compare All