Elantas (Altana) AD-10

Elantas (Altana) AD-10 Datasheet
  • Description for Elantas (Altana) AD-10

    A unique single component epoxy that may be used as a structural adhesive or miniature electronic potting compound. The heat-cure formulation was designed for rapid cure at temperatures as low as 200ºF, yet it exhibits good storage life at room temperature.

    *See Terms of Use Below

    Brand Cytec
    Application Type Pot
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate AL, Ceramics, Metal, Plastics
    Industry Filters, Magnet assemblies
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method Heat
    Cure Temperature (°C) 93, 107, 121, 135, 149, 163, 204
    Cure Time (min) 120 to 150, 65 to 80, 30 to 40, 12 to 20, 8 to 12, 5.00 to 8, 2.00 to 4.00
    Viscosity (cPs) Thixo, Non-Flow
    Color Brown
    Chemical Resistance Acids and bases
    High Temperature Resistance (°C) 150
    Low Temperature Resistance (°C) -55
  • Technical Data for Elantas (Altana) AD-10

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Speakers - Speaker assemblies
      • Filters
      • Magnet - Magnet assemblies
      • Other - Structural adhesive or miniature electronic potting compound, Batteries, End cap filling, Structural materials, Miniature potting and staking
    • Chemistry
    • Cure Method
      • Heat
    • Color
      • Brown
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 93, 107, 121, 135, 149, 163, 204
    Cure Time (min) 120 to 150, 65 to 80, 30 to 40, 12 to 20, 8 to 12, 5.00 to 8, 2.00 to 4.00
    Viscosity (cPs) Thixo, Non-Flow Test Method
    Bond Strength
    Structural/Load-Bearing Structural
    Shear Strength (psi) 3,000 Test Method
    Material Resistance
    Chemical Resistance Acids and bases
    High Temperature Resistance (°C) 150
    Low Temperature Resistance (°C) -55
    Conductivity
    Dissipation Factor 0.00600 Test Method
    Dielectric Strength (V/mil) Good, >375 (vpm)
    Dielectric Constant 4.00 Test Method
    Hardness
    Shore D Hardness 85
    Other Properties
    Specific Gravity 1.270 Test Method
    % Solids (%) 100
    Business Information
    Shelf Life Details Store in a cool, dry area. Storage conditions should not exceed 26°C (80ºF). Under these conditions storage life is expected to be at least four months. The shelf life may be extended up to eight months by storing at 5ºC (41°F)., Store in a cool, dry area. Storage conditions should not exceed 26°C (80ºF). Under these conditions storage life is expected to be at least four months. The shelf life may be extended up to eight months by storing at 5ºC (41°F).
    Shelf Life Temperature (°F) 77, 41
    Shelf Life (mon) 4, 8
  • Best Practices for Elantas (Altana) AD-10

    *See Terms of Use Below

    1. Surface Preparation

      The surface to be bonded or potted should be free of all grease, dirt and foreign matter.

    2. Application

      For bonding, apply CONAPOXY® AD-10 by suitable means adjusting the glue line from 1 to 10 mils. Contact pressure is suitable for most bonding applications.

  • Comparable Materials for Elantas (Altana) AD-10

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. afe0e45b-6679-4cf1-b62c-9f24d8ad4601
  2. afe0e45b-6679-4cf1-b62c-9f24d8ad4601

Popular Articles

Testing the effectiveness of surface treatments

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Epoxies in the Aerospace Industry

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Viscosity Test Methods
Viscosity Temperature
Thixo 25°C
Non-Flow 25°C
Shear Strength Test Methods
Shear Strength Type Substrate
3,000 psi Lap shear strength AL/AL
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.00 25°C Dielectric constant, 1 KHz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.00600 25°C Dissipation Factor, 1 KHz
Specific Gravity Test Methods
Specific Gravity Temperature
1.270 25°C