Elantas (Altana) Conapoxy FR-1080 Datasheet Elantas (Altana) Conapoxy FR-1080

Information provided by Gluespec
  • Description for Elantas (Altana) Conapoxy FR-1080

    It is a two-component, unfilled epoxy potting system, Potting and encapsulation of electrical / electronic devices such as modules, transformers, and coils as well as strain sensitive applications, Long work life.

    *See Terms of Use Below

    Brand Cytec, Conapoxy
    Application Type Potting, Encapsulation
    1 Part or 2 Part 2-Part
    Material Form Compound
    Industry Electrical Devices, Transformers, Coils, Electronic Devices, Modules
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method 2-Part cure
    Cure Temperature (°C) 120, 180
    Cure Time (min) 240 to 960, 120
    Viscosity (cPs) Low, 2,500
    High Temperature Resistance (°C) High temp
    Volume Resistivity (O) 9.7e16 (ohm-cm), 2.9e14 (ohm-cm)
    Key Specifications CONAPOXY® FR-1080 Part A Resin and CONAPOXY® FR-1080 Part B Hardener comply with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 (RoHS 2.0) as amended 31 March 2015.
  • Technical Data for Elantas (Altana) Conapoxy FR-1080

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Compound
    • Industry
      • Electronics - Electrical Devices, Electronic Devices, Modules
      • Transformers
      • Coils
      • Industrial
      • Other - Sensitive applications
    • Chemistry
    • Application Method
      • Other - Meter-mix vacuum potting / casting, Meter-mix bench potting / casting, Hand-mix bench potting / casting
    • Cure Method
      • 2-Part Cure
    • Key Specifications
      • RoHS (Restriction of Hazardous Substances) - CONAPOXY® FR-1080 Part A Resin and CONAPOXY® FR-1080 Part B Hardener comply with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 (RoHS 2.0) as amended 31 March 2015.
    • Brand
      • Conapoxy
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 120, 180
    Cure Time (min) 240 to 960, 120
    Viscosity (cPs) Low, 2,500 Test Method
    Set Time (min) 60 to 120 Test Method
    Linear Shrinkage (%) 1.40 Test Method
    Work / Pot Time (min) >120 Test Method
    Mix Ratio 100:67 (by volume), 100:83 (by weight)
    Bond Strength
    Compressive Strength (psi) 4,200 Test Method
    Flexural Strength (psi) 12,800 Test Method
    Tear Strength (piw) 250 (pli) Test Method
    Tensile Strength (psi) 8,200 Test Method
    Material Resistance
    High Temperature Resistance (°C) High temp
    Conductivity
    Dissipation Factor 0.00400, 0.00400 Test Method
    Dielectric Strength (V/mil) 600 (vpm), 450 (vpm) Test Method
    Dielectric Constant 3.12, 3.29 Test Method
    Surface Resistivity (O) 5.5e16 (Ohms), 5.7e14 (Ohms) Test Method
    Volume Resistivity (O) 9.7e16 (ohm-cm), 2.9e14 (ohm-cm) Test Method
    Hardness
    Shore D Hardness 90
    Elongation (%) 2
    Modulus (psi) 388,650 Test Method
    Other Properties
    Specific Gravity 1.030, 1.230 Test Method
    Business Information
    Shelf Life Details The shelf life of CONAPOXY® FR-1080 resin and hardeners is 18 months from date of manufacture when stored in the original unopened container., Store at or below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for twelve (12) months from the date of shipment
    Shelf Life Temperature (°F) <77
    Shelf Life Type From date of manufacture, From the date of shipment
    Shelf Life (mon) 18, 12
  • Best Practices for Elantas (Altana) Conapoxy FR-1080

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) Conapoxy FR-1080

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Epoxies in the Aerospace Industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conapoxy FR-1080

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Linear Shrinkage Test Methods
Linear Shrinkage Test Method
1.40 % ASTM D2566
Set Time Test Methods
Set Time Set Temperature
60 to 120 min 100°C
Viscosity Test Methods
Viscosity Test Method Temperature
Low
2,500 cPs Mixed Materials,(initial) 25°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
>120 min Mixed Materials 25°C
Compressive Strength Test Methods
Compressive Strength Cure Temperature Test Method
4,200 psi 25°C ASTM D695
Flexural Strength Test Methods
Flexural Strength Test Temperature Test Method
12,800 psi 25°C ASTM D790
Tear Strength Test Methods
Tear Strength Test Temperature Test Method
250 (pli) 0°C ASTM D412
Tensile Strength Test Methods
Tensile Strength Test Temperature
8,200 psi 25°C
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
3.12 25°C Dielectric Constant, @ 1 KHz
3.29 105°C Dielectric Constant, @ 1 KHz
Dielectric Strength Test Methods
Dielectric Strength Temperature
600 (vpm) 25°C
450 (vpm) 105°C
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.00400 25°C Dissipation Factor @ 1 KHz
0.00400 105°C Dissipation Factor @ 1 KHz
Surface Resistivity Test Methods
Surface Resistivity Temperature
5.5e16 (Ohms) 25°C
5.7e14 (Ohms) 105°C
Volume Resistivity Test Methods
Volume Resistivity Temp (°C)
9.7e16 (ohm-cm) 25°C
2.9e14 (ohm-cm) 105°C
Modulus Test Methods
Modulus Test Method
388,650 psi Flexural Modulus
Specific Gravity Test Methods
Specific Gravity Temperature
1.030 25°C
1.230 25°C