Elantas (Altana) EN-22

CONTACT REP

Description for Elantas (Altana) EN-22

CONATHANE® EN-20 Series are two-component, liquid, low viscosity, low toxicity, room temperature curing polyurethane resin systems. These systems were formulated specifically for the potting, casting, embedding, and encapsulation of electronic circuits, components, and power devices.

*See Terms of Use Below

Brand	Cytec
Application Type	Pot, Encapsulate
1 Part or 2 Part	2-Part
Material Form	Liquid
Manufacturer	Elantas (Altana)
Chemistry	Low Toxicity , Polyurethane resin
Cure Method	2-Part Cure
Cure Temperature (°C)	25, 80
Cure Time (min)	240, 10,080
Viscosity (cPs)	2,200, Low
Volume Resistivity (O)	8.9e15

Best Practices for Elantas (Altana) EN-22

Register for FREE to view more details

Why register?

View Technical Details
View Test Methods
View Key Specifications
View Similar Materials
Save your Project Searches

See what Gluespec offers

Sign up now Already registered? Sign in!

Email: *

Password: *

Confirm Password: *

Do you prefer to see data in °F or °C?

First Name: *

Last Name: *

Phone: *

Company Name: *

Address: *

Postal Code: *

Country: *

Job Function: *

Industry: *

Describe: *

I agree to the terms of use *

*: Required

Technical Data for Elantas (Altana) EN-22

*See Terms of Use Below

Overview

Application Type
- Pottant / Encapsulant - Pot, Encapsulate
1 Part or 2 Part
- 2-Part
Material Form
- Liquid
Chemistry
- Other - Low Toxicity , Polyurethane resin
Cure Method
- 2-Part Cure
Brand
- Cytec

Specifications

Cure Specs

Cure Temperature (°C)	25, 80
Cure Time (min)	240, 10,080
Viscosity (cPs)	2,200, Low
Linear Shrinkage (%)	0.015 (in./in.)
Work / Pot Time (min)	0.83
Mix Ratio	100:106 (by volume)

Bond Strength

Tear Strength (piw)	162
Tensile Strength (psi)	2,400

Conductivity

Dissipation Factor	0.02700
Dielectric Constant	3.30
Thermal Conductivity (W/m°K)	0.00
Volume Resistivity (O)	8.9e15

Hardness

Shore A Hardness	90
Elongation (%)	128

Best Practices for Elantas (Altana) EN-22

*See Terms of Use Below
Comparable Materials for Elantas (Altana) EN-22

*See Terms of Use Below

Spec Engine^® Results
- URA-Bond 21-MV(Henkel)
  A medium-viscosity two-component polyurethane adhesive that provides excellent high-impact resistant bonds to a wide variety of substrates.
- Edge & Seal T-35(Devcon (ITW))
  A Tough, rubber-like urethane compound for making a broad range of repairs, and for tooling and molding applications, excellent humidity resistance, high tensile and tear strength, fast-curing, self-leveling, oil-resistant.
- US5544(Henkel)
  Fast gelling, flexible, flame-retardant, mineral-filled, polyurethane compound. Recommended for high productivity.
- Compare All
Closest Results from this Manufacturer
- Conathane EN-21(Elantas (Altana))
  CONATHANE® EN-20 Series are two-component, liquid, low viscosity, low toxicity, room temperature curing polyurethane resin systems. These systems were formulated specifically for the potting, casting, embedding, and encapsulation of electronic circuits, components, and power devices.
- EN-4 w/ EN-8(Elantas (Altana))
  A two-component, non-MbOCA-based high, strength liquid polyurethane resin systems designed to ensure the performance of electrical/electronic assemblies exposed to severe environmental extremes. Used with EN-4 (Part A).
- Conathane EN-2553(Elantas (Altana))
  It is a two-component, filled, flame-retardant polyurethane potting and encapsulation of electronic components, modules, circuit boards, assemblies and related devices.
- Compare All