Elantas (Altana) EN-24 Datasheet Elantas (Altana) EN-24

Information provided by Gluespec
  • Description for Elantas (Altana) EN-24

    CONATHANE® EN-20 Series are two-component, liquid, low viscosity, low toxicity, room temperature curing polyurethane resin systems. These systems were formulated specifically for the potting, casting, embedding, and encapsulation of electronic circuits, components, and power devices.

    *See Terms of Use Below

    Brand Cytec
    Application Type Pot, Encapsulate
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Manufacturer Elantas (Altana)
    Chemistry Low Toxicity, Polyurethane Resin
    Cure Method 2-Part Cure
    Cure Temperature (°C) 25, 80
    Cure Time (min) 240, 10,080
    Viscosity (cPs) 3,300, Low
    Volume Resistivity (O) 1.7e15
  • Technical Data for Elantas (Altana) EN-24

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Chemistry
      • Other - Low Toxicity, Polyurethane Resin
    • Cure Method
      • 2-Part Cure
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 80
    Cure Time (min) 240, 10,080
    Viscosity (cPs) 3,300, Low
    Linear Shrinkage (%) 0.013 (in./in.)
    Work / Pot Time (min) 0.67
    Mix Ratio 100:82 (by volume)
    Bond Strength
    Tear Strength (piw) 490 (pli)
    Tensile Strength (psi) 3,300
    Conductivity
    Dissipation Factor 0.03500
    Dielectric Constant 3.20
    Thermal Conductivity (W/m°K) 0.00
    Volume Resistivity (O) 1.7e15
    Hardness
    Shore D Hardness 70
    Elongation (%) 72
  • Best Practices for Elantas (Altana) EN-24

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) EN-24

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) EN-24

Gluespec Poll

Which answer best describes a project you are currently working on?