Elantas (Altana) MR-5016

CONTACT REP

Description for Elantas (Altana) MR-5016

A non-flammable, low viscosity liquid mold release and parting agent. It is based on silicone polymers and gives excellent release characteristics for simple and complex potting, casting, and molding operations.

*See Terms of Use Below

Brand	Cytec
Application Type	Pot, Mold Release
1 Part or 2 Part	1-Part
Material Form	Liquid
Substrate	Metal molds, Plastic molds
Manufacturer	Elantas (Altana)
Chemistry	Based on silicone polymers
Cure Method	Heat
Viscosity (cPs)	Low, 225
Color	Clear
Can Be Used In Conjunction With These Materials	Epoxy, Polyurethane, Polyester resin

Best Practices for Elantas (Altana) MR-5016

Register for FREE to view more details

Why register?

View Technical Details
View Test Methods
View Key Specifications
View Similar Materials
Save your Project Searches

See what Gluespec offers

Sign up now Already registered? Sign in!

Email: *

Password: *

Confirm Password: *

Do you prefer to see data in °F or °C?

First Name: *

Last Name: *

Phone: *

Company Name: *

Address: *

Postal Code: *

Country: *

Job Function: *

Industry: *

Describe: *

I agree to the terms of use *

*: Required

Technical Data for Elantas (Altana) MR-5016

*See Terms of Use Below

Overview

Application Type
- Mold Release
- Pottant / Encapsulant - Pot
1 Part or 2 Part
- 1-Part
Material Form
- Liquid
Substrate
- Metal - Metal molds
- Plastic - Plastic molds
Chemistry
- Silicone - Based on silicone polymers
Application Method
- Brush
- Spray
- Other - Wip
Cure Method
- Heat
Color
- Clear / Transparent - Clear
Can Be Used In Conjunction With These Materials
- Epoxies - Epoxy
- Urethanes - Polyurethane
- Other - Polyester resin
Brand
- Cytec

Specifications

Cure Specs

Viscosity (cPs)	Low, 225	Test Method

Conductivity

Unfilled	Filled or unfilled

Other Properties

Specific Gravity	0.968	Test Method
Flash Point (°F)	Non-flammable

Business Information

Shelf Life (mon)	Indefinite

Best Practices for Elantas (Altana) MR-5016

*See Terms of Use Below
1. Surface Preparation
  
  For best surface finish of the cast part, lightly buff the inside of the mold with a clean, lint-free cloth.
2. Application
  
  Apply CONAP® MR-5016 to clean molds by brushing, spraying, or wiping. Use care to avoid over-application.
Comparable Materials for Elantas (Altana) MR-5016

*See Terms of Use Below

Spec Engine^® Results
- Conap MR-5012(Elantas (Altana))
  It is a low viscosity, silicone- based liquid mold release and parting agent, releases epoxy, polyurethane, polyester and most plastic resins from metal, plastic or other non-porous molds.
- Releasys 89(Miller-Stephenson)
  Miller-Stephenson Releasys 89 is a 1-Part Solvent Non-oily Liquid used to Mold Release Abrasive substrates, Polyurethanes and Epoxy
- Compare All