3M 94 Tape Primer
Application Type Primer 1 Part or 2 Part 1-Part Material Form Liquid Substrate Glass, Metal, Polypropylene, Wood, Concrete, Polyethylene, PET/PBT blends, PET/PBT blends, ABS, Painted metal surfaces Manufacturer 3M Viscosity (cPs) 1.00 to 10, <35 Color clear dark orange, Clear light yellow Can Be Used In Conjunction With These Materials Tapes
Technical Data for 3M 94 Tape Primer
1 Part or 2 Part
- Industrial - Tape Primer
- Dispenser - pressurized flow gun, other similar type of application equipment
- Roll - knurled roller
- Other - Swab
- Orange - clear dark orange
- Yellow - Clear light yellow
Can Be Used In Conjunction With These Materials
Viscosity (cPs) 1.00 to 10, <35
Flash Point (°F) -4.0 Test Method % Solids (%) 6 Test Method
Shelf Life Details 18 months from date of manufacture when stored in the original container at 60-80°F (15-27°C).;Keep 3M™ Tape Primer 94 in the original container.;Transfer only a small amount into a work vessel for use.;Keep original container tightly sealed to avoid solvent evaporation. Shelf Life Temperature (°F) 59 to 81 Shelf Life Type From date of manufacture. Shelf Life (mon) 18
Best Practices for 3M 94 Tape Primer
The bonding surface must be relatively clean and dry. Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture. A clean lint-free cloth should be used.
Carefully read and follow manufacturer’s precautions and directions for use when handling cleaning solvents.
Shake 3M primer 94 well before using. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface. Allow 3M primer 94 to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature. Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 applications of 3M primer 94 for uniform coverage and good adhesion. Allow first application of primer to dry before applying the second coat. 3M primer 94 may be applied with brush or swab. It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment.
3M Primer 94 can be removed with acetone. Vigorous scrubbing may be required. Test in small area to insure acetone will not affect the substrate surface.
Comparable Materials for 3M 94 Tape Primer
Spec Engine® Results