-
Description for 3M Rite-Lok Anaerobic Adhesive Activator AC471
General-purpose surface activator/primer that cure anaerobic adhesives on inactive or very cold surfaces.Application Type Primer 1 Part or 2 Part 1-Part Material Form Liquid Manufacturer 3M Chemistry Acetone, IPA Cure Method Anaerobic Cure Time (min) fast Viscosity (cPs) <1.00 Color Yellow Can Be Used In Conjunction With These Materials Anaerobic Cure Materials -
Technical Data for 3M Rite-Lok Anaerobic Adhesive Activator AC471
Overview
-
Application Type
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Liquid
-
Chemistry
- Solvent-Based - Acetone, IPA
-
Cure Method
- Anaerobic
-
Color
- Yellow
-
Can Be Used In Conjunction With These Materials
- Anaerobic Cure Materials
Specifications
Cure Specs
Cure Time (min) fast Viscosity (cPs) <1.00 Other Properties
Specific Gravity 0.800 Business Information
Shelf Life Details Storage: Store product in cool, dry area out of direct sunlight.;Twelve months when stored at 60° to 80°F (16° to 27°C) in the original unopened container. Shelf Life Temperature (°F) 60 to 80 Shelf Life (mon) 12 -
-
Best Practices for 3M Rite-Lok Anaerobic Adhesive Activator AC471
-
Surface Preparation
Ensure parts are clean, dry, and free from oil and grease.
Apply to one or both bonding surfaces.
When using solvents and/or aerosols, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use.
-
Application
Adhesive is applied to one substrate and activator is sprayed or painted on to the other.
Apply to one or both bonding surfaces.
Allow parts to dry completely (usually 30-60 seconds). Activator-coated parts may be held up to their On-Part Life but surface contamination must be avoided
Apply a Rite-Lok™ Anaerobic Adhesive to one or both parts making sure there is sufficient product coverage.
Assemble immediately, moving surfaces back and forth to ensure full distribution of the adhesive.
Secure the assembly until fixtured.
An alternative method of use is in post assembly application. After apply anaerobic adhesive and assembling parts the anaerobic activator is applied topically over the joint area to aid cure.
-
Curing
Curing commences when the two parts are assembled.
Allow parts to dry completely (usually 30-60 seconds). Activator-coated parts may be held up to their On-Part Life but surface contamination must be avoided.
-
-
Comparable Materials for 3M Rite-Lok Anaerobic Adhesive Activator AC471
Spec Engine® Results
-
Primer T(Resinlab)Single Component, non-ODC solvent based surface activators. They are designed to promote the speed of cure of anaerobic adhesives and sealants.
-
7091(Henkel)Reactive monomer based "solvent free" primer for use with LOCTITE® anaerobic products for difficult to bond applications where galvanized steel or zinc electroplated surfaces are involved.
- Compare All
Closest Results from this Manufacturer
-
Scotch-Weld Instant Surface Activator(3M)Liquid chemical products used in conjunction with 3M™ Scotch-Weld™ Instant Adhesives.
- Compare All
-
Popular Articles
Testing the effectiveness of surface treatments
Read Article
Primers and Surface Preparation for Proper Adhesive Wetting & Bonding - Q&A
Read Article
Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read Article
Structural Adhesives Guide
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read Article
Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read Article
Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read Article
Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads
1 VIEW FREE
Don't Leave!
View 3M - Rite-Lok Anaerobic Adhesive Activator AC471 now.
