

-
Description for Bostik N-32 Primer
Primer has been developed to provide adhesion to difficult surfaces such as electrostatically applied or baked coatings, including fluorocarbons, silicone acrylics, acrylics, etc. N-32 is also an effective primer on treated masonry and concrete surfaces to which many primers have difficulty attaining adhesion.Application Type Prime 1 Part or 2 Part 1-Part Material Form Liquid Substrate Acrylics, Silicone acrylics Industry Electrostatically Manufacturer Bostik Chemistry Solvent-Based Elastomeric Elastomeric -
Technical Data for Bostik N-32 Primer
Overview
-
Application Type
- Primer - Prime
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Liquid
-
Substrate
- Acrylic (PMMA) - Acrylics, Silicone acrylics
- Other - Fluorocarbons
-
Industry
- Electronics - Electrostatically
-
Chemistry
-
Cure Method
- None
Specifications
Cure Specs
Dry Time (min) 5.00 to 10 Hardness
Elastomeric Elastomeric -
-
Best Practices for Bostik N-32 Primer
-
Surface Preparation
Surfaces to be primed must be dry, clean, and free of oils, waterproofing compounds, mold-release agents, etc.
-
Application
Primer should be applied in a thin, continuous film free of runs, drops or pools. Allow primer to dry thoroughly to the touch before applying sealant. Do not apply primer to damp or wet surfaces.
-
Curing
Drying time is approximately 5 to 10 minutes.
-
-
Comparable Materials for Bostik N-32 Primer
Spec Engine® Results
Popular Articles
Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleTesting the effectiveness of surface treatments
Read ArticlePrimers and Surface Preparation for Proper Adhesive Wetting & Bonding - Q&A
Read ArticleStructural Adhesives Guide
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads
