Bostik Prime Coat Datasheet Bostik Prime Coat

Information provided by Gluespec
  • Description for Bostik Prime Coat

    Primer is recommended for use on concrete, masonry, wood and most porous substrates if intermittent or continuous water immersion is anticipated.

    *See Terms of Use Below

    Application Type Prime
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Substrate Wood, Concrete, Porous
    Manufacturer Bostik
    Chemistry Solvent-Based
  • Technical Data for Bostik Prime Coat

    Overview
    Specifications
    Cure Specs
    Dry Time (min) 75 to 90
  • Best Practices for Bostik Prime Coat

    *See Terms of Use Below

    1. Surface Preparation

      Surfaces to be primed must be dry, clean, and free of oils, waterproofing compounds, mold-release agents, etc.

    2. Application

      Primer should be applied in a thin, continuous film free of runs, drops or pools. Allow primer to dry thoroughly to the touch before applying sealant. Do not apply primer to damp or wet surfaces.

    3. Curing

      Drying time is approximately 1-1/4 to 1-1/2 hours—35% RH @ 70°F.

  • Comparable Materials for Bostik Prime Coat

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Structural Adhesives Guide

Read Article

Testing the effectiveness of surface treatments

Read Article

Primers and Surface Preparation for Proper Adhesive Wetting & Bonding - Q&A

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Bostik Prime Coat

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?