Bostik Simson Primer M Datasheet Bostik Simson Primer M

Information provided by Gluespec
  • Description for Bostik Simson Primer M

    Fast drying “wash primer” for SMP based products.

    *See Terms of Use Below

    Application Type Primer, Cleaner – For Substrates
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Substrate Aluminium, Copper, Lacquered metals, Polyester, PVC, Steel, Brass, ABS, Powder coated metal
    Manufacturer Bostik
    Chemistry Solvent-Based
    Color Transparent
    High Temperature Resistance (°C) High
    Can Be Used In Conjunction With These Materials SMP based products
  • Technical Data for Bostik Simson Primer M

    Overview
    • Application Type
      • Cleaner – For Substrates
      • Primer
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
    • Chemistry
    • Application Method
      • Brush - Clean, colour free cloth wetted with Primer M, Tissue paper wetted with Primer M
    • Cure Method
      • None
    • Color
      • Clear / Transparent - Transparent
    • Can Be Used In Conjunction With These Materials
      • Silyl-Modified Polymers (SMPs) - SMP based products
    Specifications
    Cure Specs
    Dry Time (min) Fast, 5.00
    Material Resistance
    High Temperature Resistance (°C) High
    Other Properties
    Specific Gravity 0.76 (g/ml)
    Flash Point (°F) 46.9
    Business Information
    Shelf Life Details Primer M may be stored for 9 months in a closed (unopened) container in a dry place at temperatures between 40°F to 87°F (4°C to 30°C).
    Shelf Life Temperature (°F) 39 to 86
    Shelf Life (mon) 9
    Not Good For
    Don't Use With Paint
  • Best Practices for Bostik Simson Primer M

    *See Terms of Use Below

    1. Surface Preparation

      The substrates should be clean, dry, dust- and grease free.

    2. Application

      Keep the packaging well closed until the moment of use. Do not use Primer M direct from the original packaging. Pour as much primer in a clean glass or tin as can be used within 30 minutes and immediately close the original tin firmly. Primer M is used as a so-called “wash primer”. The primer should not be applied in too thick a coat. Firmly rub the surface by means of a clean, colour free cloth or tissue paper, wetted with Primer M. In this way the surfaces will be cleaned and primed in one operation. After a drying time of approximately 5 minutes (solvent should be evaporated) the sealant or adhesive can be applied. Best results are obtained when the bonding/sealing will be realised within 6 hours after applying of Primer M. Therefore do not apply more primer than can be sealed within 6 hours. Avoid contact with the primed surface, because greasy fingers can cause a bad adhesion.

      See Manufacturer Technical Data Sheet for more details.

  • Comparable Materials for Bostik Simson Primer M

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Structural Adhesives Guide

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Primers and Surface Preparation for Proper Adhesive Wetting & Bonding - Q&A

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Bostik Simson Primer M

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?