Daubert Tectyl 1420 HAPS Free Black Datasheet Daubert Tectyl 1420 HAPS Free Black

Information provided by Gluespec
  • Description for Daubert Tectyl 1420 HAPS Free Black

    A low VOC, air-dry, waterborne corrosion preventive coating. The cured film is black, hard and flexible. It provides effective protection for ferrous and non-ferrous transportation components and equipment.<br/>

    *See Terms of Use Below

    Brand Tectyl
    Application Type Coating: Protective Coating
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Substrate Metal surfaces
    Industry Protection for ferrous transportation components, Protection for non-ferrous transportation components, Protection for ferrous transportation equipment, Protection for non-ferrous transportation equipment
    Manufacturer Daubert
    Chemistry HAPS Free, Waterborne
    Cure Method Air Dry
    Coverage Test Method Theoretical Coverage @ Avg. Recommended DFT
    Coverage 310 (sq. ft./gallon)
    Cure Time (min) 1,440
    Color Black
    Density (g/cm³) 8.3 - 8.5 (lbs./gallon)
  • Technical Data for Daubert Tectyl 1420 HAPS Free Black

    Overview
    • Application Type
      • Coating : Protective Coatings - Protective Coating
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Substrate
      • Metal - Metal surfaces
      • Other - Non-ferrous, Ferrous
    • Industry
      • Transportation - Protection for non-ferrous transportation equipment, Protection for ferrous transportation equipment, Protection for non-ferrous transportation components, Protection for ferrous transportation components
    • Chemistry
    • Cure Method
      • Room Temperature / Air Dry - Air Dry
    • Color
      • Black
    • Brand
      • Tectyl
    Specifications
    Cure Specs
    Coverage Test Method Theoretical Coverage @ Avg. Recommended DFT
    Application Temperature (°F) 50 to 95
    Coverage 310 (sq. ft./gallon)
    Cure Time (min) 1,440
    Dry Time (min) 45 to 60
    Material Resistance
    Non-Corrosive Corrosion preventive
    Hardness
    Flexibility Hard, Flexible
    Other Properties
    Specific Gravity 1.020 Test Method
    Flash Point (°F) >105.0 Test Method
    Density (g/cm³) 8.3 - 8.5 (lbs./gallon) Test Method
    Business Information
    Shelf Life Details Storage: Store Tectyl 1420 HAPS Free Black at temperatures between 50-95°F (10-35°C). Mild agitation is recommended prior to use.
    Shelf Life Temperature (°F) 50 to 95
  • Best Practices for Daubert Tectyl 1420 HAPS Free Black

    *See Terms of Use Below

    1. Surface Preparation

      The maximum performance of Tectyl 1420 HAPS Free Black can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50-95°F (10-35°C) at the time of product application.

    2. Application

      Tectyl 1420 HAPS Free Black is formulated to be used as supplied. Ensure uniform consistency prior to use. Continued stirring is generally not required. If the product thickens due to cold storage or loss of water and coalescing solvent during use, contact Daubert Chemical Company. DO NOT THIN Tectyl1420 HAPS Free Black. Incorrect thinning will affect film build, dry time and product performance. Daubert Chemical Company recommends that the ambient and product temperature be 50 - 95 F (10 - 35 C) at time of application. Tectyl 1420 HAPS Free Black can be dip applied. DO NOT FREEZE Tectyl 1420 HAPS Free Black.

    3. Removal

      The dry film is not normally intended for removal. The product can be stenciled over after the film iscured. Tectyl WBS-B, citrus or alkaline cleaner will remove fresh residue accumulated on application equipment. If removability is a factor, contact Daubert Chemical Company and samples should be evaluated prior to application.

  • Comparable Materials for Daubert Tectyl 1420 HAPS Free Black

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Unique Advantages of Contact Adhesives

Read Article

Conformal Coatings

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Flash Point Test Methods
Flash Point Test Method
>40.6°C PMCC
Density Test Methods
Density Temperature
8.3 - 8.5 (lbs./gallon) 25°C
Specific Gravity Test Methods
Specific Gravity Temperature
1.020 16°C