

-
Description for Elantas (Altana) Conap MR-5012
It is a low viscosity, silicone- based liquid mold release and parting agent, releases epoxy, polyurethane, polyester and most plastic resins from metal, plastic or other non-porous molds.Brand Cytec, Conap Application Type Parting agent, Mold Release 1 Part or 2 Part 1-Part Material Form Liquid Substrate Metal, Plastic, Polyester, Polyurethane, Other non-porous molds, Epoxy , Most plastic Resin Manufacturer Elantas (Altana) Chemistry Silicone-based Cure Method Heat Cure Temperature (°C) 20 to 25 Room Temperature Viscosity (cPs) Low, 20 Color Water-white, Water-white Can Be Used In Conjunction With These Materials Room temperature or heat curing systems -
Technical Data for Elantas (Altana) Conap MR-5012
Overview
-
Application Type
- Mold Release
- Release Agent - Parting agent
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Liquid
-
Substrate
- Non-Porous Substrates - Other non-porous molds
- Metal
- Plastic - Most plastic Resin
- Polyurethane
- Epoxy - Epoxy
- Polyester
-
Industry
-
Chemistry
- Silicone - Silicone-based
-
Application Method
- Brush
- Spray
- Dip
- Other - slosh
-
Cure Method
- Heat
-
Color
- Clear / Transparent - Water-white
- White - Water-white
-
Can Be Used In Conjunction With These Materials
- Other - Room temperature or heat curing systems
-
Brand
- Conap
- Cytec
Specifications
Cure Specs
Cure Temperature (°C) 20 to 25 Room Temperature Viscosity (cPs) Low, 20 Test Method Other Properties
Specific Gravity 0.670 Test Method Flash Point (°F) -0.4 Test Method % Solids (%) 8 Test Method Business Information
Shelf Life Details Store at or below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for twelve (12) months from the date of shipment. Shelf Life Temperature (°F) <77 Shelf Life Type From date of shipment Shelf Life (mon) Indefinite, 18 -
-
Best Practices for Elantas (Altana) Conap MR-5012
-
Surface Preparation
For best surface finish of the cast part, lightly buff the inside of the mold with a clean, lint-free cloth after drying the release agent. Apply mold release after each demold cycle.
-
Application
Apply CONAP® MR-5012 to clean molds by dip, brush, spray or slosh. Drain excess release from mold and air dry 10 – 15 minutes or bake 5 minutes at 60°C / 140°F.
-
-
Comparable Materials for Elantas (Altana) Conap MR-5012
Spec Engine® Results
Closest Results from this Manufacturer
Popular Articles
Testing the effectiveness of surface treatments
Read Article6 objects held together by adhesives you probably can't live without
Read ArticleElectrically Conductive Adhesives
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Viscosity Test Methods
Viscosity | Temperature |
---|---|
Low | |
20 cPs | 25°C |
Flash Point Test Methods
Flash Point | Test Method |
---|---|
-0.4°F | ASTM D93, Material as Supplied |
% Solids Test Methods
% Solids | Test Method |
---|---|
8 % | Solids Content, Material as Supplied |
Specific Gravity Test Methods
Specific Gravity | Temperature | Test Method |
---|---|---|
0.670 | 25°C | Material as Supplied |