Dow Tub, Tile & Ceramic Silicone Sealant

Dow Tub, Tile & Ceramic Silicone Sealant Datasheet
  • Description for Dow Tub, Tile & Ceramic Silicone Sealant

    High strength; fast cure; mildew resistant; remains flexible; bonds to many common kitchen and bath substrates.

    *See Terms of Use Below

    Application Type Repair, Seal, Bond
    1 Part or 2 Part 1 Part
    Material Form Paste
    Substrate Non-porous
    Manufacturer Dow
    Chemistry Acetoxy, Silicone
    Cure Method Moisture
    Cure Time (min) Fast, 10,080
    Color Clear / Transparent, White
    High Temperature Resistance (°C) 176
    Low Temperature Resistance (°C) -40
    Key Specifications ASTM (American Standard Test Method): C920: ASTM C920 Type S, Grade NS, Class 25, Use NT, G and A., TT (U.S. Federal Specification): S-00230C: Federal Specificaiton TT-S-00230C, Type II, Class A; Federal Specification TT-S-001543A, Type non-sag, Class A, TT (U.S. Federal Specification): S-001543A: Federal Specificaiton TT-S-00230C, Type II, Class A; Federal Specification TT-S-001543A, Type non-sag, Class A, FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): Meet the requirements of FDA Regulation No. 21CFR177.2600
  • Technical Data for Dow Tub, Tile & Ceramic Silicone Sealant

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Paste
    • Substrate
      • Non-Porous Substrates - Non-porous
    • Industry
      • Industrial - Tub, Saunas, Drain, Piping
      • Construction - Shower enclosures, Countertops, Lavatories, Faucets, Plumbing fixtures, Shower doors , Floor Seams
      • Other - Bathtubs
    • Chemistry
    • Cure Method
      • Moisture
    • Color
      • Clear / Transparent
      • White
    • Key Specifications
      • ASTM (American Standard Test Method): C920: Class 25 - ASTM C920 Type S, Grade NS, Class 25, Use NT, G and A.
      • TT (U.S. Federal Specification): S-00230C: Class A - Federal Specificaiton TT-S-00230C, Type II, Class A; Federal Specification TT-S-001543A, Type non-sag, Class A
      • TT (U.S. Federal Specification): S-001543A: Class A - Federal Specificaiton TT-S-00230C, Type II, Class A; Federal Specification TT-S-001543A, Type non-sag, Class A
      • FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): 177.2600 - Meet the requirements of FDA Regulation No. 21CFR177.2600
    Specifications
    Cure Specs
    Application Temperature (°F) -20 to 122
    Cure Time (min) Fast, 10,080
    Set Time (min) 1,440 Test Method
    Tack Free Time (min) 15 to 20 Test Method
    Bond Strength
    General Bond Strength (psi) High
    Tensile Strength (psi) 325 Test Method
    Material Resistance
    High Temperature Resistance (°C) 176
    Low Temperature Resistance (°C) -40
    Hardness
    Shore A Hardness 27 Test Method
    Elongation (%) 6 Test Method
    Flexibility Flexible
    Business Information
    Shelf Life Details Store below 90° F (32°C) in a dry place., To store short term, replace cap., To store long term, unscrew nozzle, screw cap in cartridge and store nozzle in cap.
    Not Good For
    Don't Use For structural glazing, prolonged submersion in water or belowgrade applications.
    Don't Use With oily woods, methylmethacrylate, polycarbonate, surfaces that might bleed oils, plasticizers or solvents or porous surfaces such as cement-like materials, stone or surfaces prone to attack by weak acids., brass,, copper, zinc, zincalloy, containing fixtures (galvanized).
  • Best Practices for Dow Tub, Tile & Ceramic Silicone Sealant

    *See Terms of Use Below

  • Comparable Materials for Dow Tub, Tile & Ceramic Silicone Sealant

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Dow - Tub, Tile & Ceramic Silicone Sealant

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

Intro to Protecting Power Supplies

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Set Time Test Methods
Set Time Set Temperature Test Method
1,440 min 25°C 77°F 25°C and 50% relative humidity
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
15 to 20 min 25°C 77°F 25°C and 50% relative humidity
Tensile Strength Test Methods
Tensile Strength Cure Time
325 psi 10,080 min
Elongation Test Methods
Elongation Test Method
6 % After 7 days
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
27 After 7 days
;