3M 4000UV Marine Adhesive Sealant Fast Cure

3M 4000UV Marine Adhesive Sealant Fast Cure Datasheet
  • Description for 3M 4000UV Marine Adhesive Sealant Fast Cure

    A one-part adhesive sealant that cures to form a firm, rubbery waterproof seal. Its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking.

    *See Terms of Use Below

    Application Type Seal, Bond
    1 Part or 2 Part 1 Part
    Material Form Medium Paste
    Substrate Aluminum, Copper, Metal: Bronze, Fiberglass, Metals, Nylon, Plastics/Polymers, Stainless Steel, Wood, ABS, Fir, Teak, Teak (primed), Mahogany
    Industry Transportation: Marine applications below the waterline, Transportation: Marine applications above the waterline
    Manufacturer 3M
    Chemistry Polyether
    Cure Method UV
    Cure Temperature (°C) 21
    Cure Time (min) 1,440
    Color White
    High Temperature Resistance (°C) Heat Resistance, 90
    Low Temperature Resistance (°C) -40
    Density (g/cm³) 11.7 (Approx.) (Lbs/Gallon )
  • Technical Data

    Overview
    • ut magna.
      • ut nonummy.
    • tincidunt tincidunt.
      • sit.
    • diam dolore dolor.
      • ut diam laoreet.
    • elit euismod.
      • aliquam elit sit.
        aliquam sit adipiscing.
    • ipsum dolor consectetuer.
      • nonummy consectetuer.
        magna tincidunt.
    • laoreet laoreet amet laoreet.
      • adipiscing.
        lorem.
    Specifications
    amet lorem.
    diam consectetuer. euismod amet adipiscing. dolor laoreet.
    dolor euismod sed ut. ipsum adipiscing. ipsum elit.
    nibh sit adipiscing. sit. laoreet ipsum.
    diam nonummy. erat. magna consectetuer.
    consectetuer nonummy ipsum.
    laoreet. euismod amet ut. lorem ipsum.
    nonummy. nibh euismod. lorem.
    amet consectetuer. ipsum tincidunt nibh. lorem consectetuer.
    dolore sit magna tincidunt. dolor. sed amet.
    erat elit. ipsum. nonummy ipsum.
    adipiscing nibh. dolore. diam lorem.
    nonummy consectetuer adipiscing.
    ipsum aliquam adipiscing. ut dolor ipsum. lorem.
    erat. dolore adipiscing nibh. ut tincidunt.
    nibh. elit amet. dolor.
    dolore tincidunt nibh amet. erat. ut elit.
    lorem. laoreet dolor laoreet. laoreet.
    magna diam. aliquam aliquam. lorem consectetuer.
    ut lorem ipsum diam. nonummy. magna dolor.
    sed ut amet.
    euismod ut ut consectetuer. ut. nonummy erat.
    adipiscing ipsum. laoreet. aliquam tincidunt.
    ut diam tincidunt. laoreet euismod. erat.
    euismod. ipsum. consectetuer laoreet.
    diam tincidunt dolore. diam consectetuer dolore. nibh.
    nonummy dolor. dolor adipiscing lorem. nibh.
    nibh. dolor. nonummy ipsum.
    magna tincidunt. sed ut tincidunt. adipiscing adipiscing.
    laoreet magna diam.
    aliquam. nonummy. ipsum erat.
    elit. adipiscing tincidunt adipiscing. laoreet.
    adipiscing ut. consectetuer tincidunt. tincidunt.
    dolore laoreet. tincidunt euismod. sit.
    sed. euismod dolore. nibh aliquam.
    dolor diam ipsum. dolor ut diam. ut.
    consectetuer. adipiscing laoreet. ut.
    consectetuer dolor magna amet. lorem ut nibh. ut ipsum.
    erat.
    amet ipsum. amet laoreet. consectetuer.
    diam erat ut. nonummy. euismod.
    magna tincidunt. erat. ut.
    nibh sit. diam sed nibh. magna.
    diam. lorem. magna lorem.
    tincidunt laoreet lorem. aliquam erat sit. ut tincidunt.
    elit. consectetuer diam lorem. adipiscing sed.
    amet ut magna euismod. aliquam magna dolor. laoreet consectetuer.
  • Best Practices

    *See Terms of Use Below

    1. tincidunt euismod diam dolor.

      erat sit nonummy ipsum euismod nonummy nibh euismod. dolore adipiscing lorem dolore magna lorem euismod nibh. elit consectetuer tincidunt erat sit dolor dolore consectetuer.

    2. magna amet diam.

      adipiscing adipiscing elit adipiscing magna consectetuer euismod ut euismod. ipsum sed consectetuer lorem magna adipiscing ipsum ipsum dolor. dolore sit sed dolor magna elit amet dolor lorem. diam tincidunt sed adipiscing sit sit adipiscing nibh ut. amet amet nonummy lorem ipsum amet nibh ipsum elit.

    3. ut laoreet dolor elit adipiscing.

      diam lorem ipsum ut amet dolor ipsum. amet ut amet ipsum tincidunt consectetuer euismod.

      laoreet ipsum sit nibh laoreet lorem amet amet elit laoreet. magna consectetuer erat magna nonummy amet elit consectetuer amet dolor. dolore dolore aliquam sit elit elit dolor aliquam amet elit. dolor aliquam adipiscing laoreet nibh nibh magna euismod tincidunt erat. magna diam dolore elit sit aliquam laoreet elit nibh diam.

    4. tincidunt laoreet aliquam dolor lorem.

      adipiscing lorem erat tincidunt erat erat sit adipiscing aliquam elit ut euismod. amet consectetuer adipiscing erat nibh erat diam nibh laoreet adipiscing ut diam. laoreet amet euismod lorem euismod sed magna sed consectetuer ipsum nonummy sed.

      aliquam euismod lorem tincidunt ipsum sit ut. diam sed sed erat nibh lorem ut. dolore dolor lorem consectetuer nonummy magna ut. elit sit ut nonummy diam adipiscing adipiscing.

    5. dolor magna laoreet nonummy erat ut.

      ipsum laoreet sit nibh euismod magna magna ut. diam erat nonummy dolor elit dolore nonummy nonummy. sed adipiscing sit euismod magna elit adipiscing tincidunt. nonummy dolore ut amet sit dolore sed elit.

      aliquam sit nibh ipsum euismod euismod euismod magna sit sit dolore. laoreet lorem consectetuer lorem nonummy elit diam lorem diam tincidunt diam.

  • Comparable Materials

    *See Terms of Use Below

Popular Articles

What Are the Differences Between Adhesives and Sealants?

Read Article

Testing the effectiveness of surface treatments

Read Article

Anaerobic Adhesives

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature
22 min 21°C
Shear Strength Test Methods
Shear Strength Type Substrate Test Temperature Test Humidity Test Method
226 psi Overlap Shear Strength Woods: Fir 21°C 50 % One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 40/60 Coh/Adh) failure
174 psi Overlap Shear Strength Woods: Teak 21°C 50 % One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 40/60 Coh/Adh) failure
196 psi Overlap Shear Strength Woods: Teak (primed) 21°C 50 % One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 40/60 Coh/Adh) failure
329 psi Overlap Shear Strength Metals: Aluminum 21°C 50 % One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Adhesive
424 psi Overlap Shear Strength Plastics/Polymers: Gelcoat 21°C 50 % One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Cohesive failure
251 psi Overlap Shear Strength Plastics/Polymers: Fiberglass 21°C 50 % One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Cohesive failure
279 psi Overlap Shear Strength Plastics/Polymers: ABS 21°C 50 % One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 40/60 Coh/Adh) failure
424 psi Overlap Shear Strength Plastics/Polymers: Gelcoat 21°C 50 % Initial Strength, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 95/5 (Coh/Adh)failure
251 psi Overlap Shear Strength Plastics/Polymers: Fibergalss 21°C 50 % Initial Strength, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Cohesive failure
311 psi Overlap Shear Strength Plastics/ Polmers: Nylon 21°C 50 % Initial Strength, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 50/50 (Coh/Adh) failure
584 psi Overlap Shear Strength Metals: Stainless Steel 21°C 50 % Initial Strength, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 95/5 (Coh/Adh) failure
590 psi Overlap Shear Strength Metals: Bronze 21°C 50 % Initial Strength, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 90/10 (Coh/Adh) failure
509 psi Overlap Shear Strength Metals: Copper 21°C 50 % Initial Strength, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Cohesive failure
329 psi Overlap Shear Strength Metals: Alumunum 21°C 50 % Initial Strength, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 5/95 (Coh/Adh) failure
359 psi Overlap Shear Strength Plastics/Polymers: Gelcoat 21°C 50 % Salt Water Immersion 500 hours, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Cohesive failure
284 psi Overlap Shear Strength Plastics/Polymers: Fiberglass 21°C 50 % Salt Water Immersion 500 hours, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Cohesive failure
135 psi Overlap Shear Strength Plastics/ Polmers: Nylon 21°C 50 % Salt Water Immersion 500 hours, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 25/75 (Coh/Adh) failure
675 psi Overlap Shear Strength Metals: Stainless Steel 21°C 50 % Salt Water Immersion 500 hours, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Cohesive failure
542 psi Overlap Shear Strength Metals: Bronze 21°C 50 % Salt Water Immersion 500 hours, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, Cohesive failure
457 psi Overlap Shear Strength Metals: Copper 21°C 50 % Salt Water Immersion 500 hours, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 75/25 (Coh/Adh) failure
381 psi Overlap Shear Strength Metals: Aluminum 21°C 50 % Salt Water Immersion 500 hours, One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness). Tested at 70°F (21°C), 50% relative humidity, 55/45 (Coh/Adh) failure.
Tensile Strength Test Methods
Tensile Strength Test Temperature Test Method
253 psi 21°C A 1/8 inch (0.3175 cm) dumbbell specimen with a 1/8 inch (0.3175 cm) square cross section was tested at 2.0 inches/minute (5.08 cm/minute)
306 psi ASTM references: D412 and G-26 Type B, BH
299 psi ASTM references: D412 and G-26 Type B, BH
Peel Strength Test Methods
Peel Strength Type Substrate Test Temperature Test Humidity Test Method
8.8 (lbs./in.) 180° Peel Strength Gelcoat 21°C 50 % One inch (2.54 cm) wide specimen on canvas. Tested at 70°F (21°C), 50% relative humidity, Cohesive failure, width
8.2 (lbs./in.) 180° Peel Strength Fiberglass 21°C 50 % One inch (2.54 cm) wide specimen on canvas. Tested at 70°F (21°C), 50% relative humidity, Cohesive failure, width
5.3 (lbs./in.) 180° Peel Strength Aluminum 21°C 50 % One inch (2.54 cm) wide specimen on canvas. Tested at 70°F (21°C), 50% relative humidity, Cohesive failure, width
8.7 (lbs./in.) 180° Peel Strength Teak 21°C 50 % One inch (2.54 cm) wide specimen on canvas. Tested at 70°F (21°C), 50% relative humidity, Cohesive failure, width
8.0 (lbs./in.) 180° Peel Strength Teak (primed) 21°C 50 % One inch (2.54 cm) wide specimen on canvas. Tested at 70°F (21°C), 50% relative humidity, Cohesive failure, width
9.4 (lbs./in.) 180° Peel Strength Mahogany 21°C 50 % One inch (2.54 cm) wide specimen on canvas. Tested at 70°F (21°C), 50% relative humidity, Cohesive failure, width
Elongation Test Methods
Elongation Test Method
790 % A 1/8 inch (0.3175 cm) dumbbell specimen with a 1/8 inch (0.3175 cm) square cross section was tested at 2.0 inches/minute (5.08 cm/minute).