3M Metal Sealant 2084

3M Metal Sealant 2084 Datasheet
  • Description for 3M Metal Sealant 2084

    Seals metal to glass in windows and doors • Resists weather, water, oil and gasoline

    *See Terms of Use Below

    Application Type Seal
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate Glass, Aluminium, Wood, Canvas to aluminum, Metal
    Manufacturer 3M
    Chemistry Acetone
    Application Method Knife coating, Trowel
    Cure Method Air dry, Solvent
    Cure Time (min) 1,440
    Viscosity (cPs) 7,000 to 2,250
    Chemical Resistance Acetone, Fuels, Gasoline, Oil, Water
    Durability Tough
    Key Specifications AAMA (American Architectural Manufacturers Association): Conforms to requirements of AAMA Specification 801.1 (Architectural Aluminum Manufacturers Association Specification title “Adhesive Type Sealant for Joints of Applied or Integral Fin.”)
  • Technical Data for 3M Metal Sealant 2084

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
    • Chemistry
      • Other - Acetone
    • Application Method
      • Dispenser - Application equipment, High pressure injection, Pump
      • Roll - Rollercoating
      • Spatula/Trowel - Knife coating, Trowel
    • Cure Method
      • Room Temperature / Air Dry - Air dry
      • Solvent
    • Key Specifications
      • AAMA (American Architectural Manufacturers Association): 801.1 - Conforms to requirements of AAMA Specification 801.1 (Architectural Aluminum Manufacturers Association Specification title “Adhesive Type Sealant for Joints of Applied or Integral Fin.”)
    Specifications
    Cure Specs
    Cure Time (min) 1,440 Test Method
    Viscosity (cPs) 7,000 to 2,250 Test Method
    Tack Free Time (min) 5.00
    Bond Strength
    Peel Strength (piw) 25 (lbs./inch) Test Method
    Material Resistance
    Chemical Resistance Acetone, Fuels, Gasoline, Oil, Water
    Environmental Resistance Environmental resistance
    Hardness
    Durability Tough
    Flexibility Flexible
    Other Properties
    Flash Point (°F) -0.4
    % Solids (%) 46, 40 to 47 Test Method
    Business Information
    Shelf Life Details For optimum storage 3M™ Scotch-Seal™ Metal Sealant 2084 should be stored at 60-80°F (15-26°C). Higher temperatures reduce normal storage life. Lower temperatures cause increased viscosity of a temporary nature. Rotate stock on a “first in-first out” basis. When stored at recommended temperature in original, unopened containter, this product has a shelf life of 15 months from the date 3M ships the product.
    Shelf Life Temperature (°F) 59 to 79
    Shelf Life Type from the date of 3M ships
    Shelf Life (mon) 15
  • Best Practices for 3M Metal Sealant 2084

    *See Terms of Use Below

    1. Surface Preparation

      Best results are obtained on clean, dry surface. Oil, grease and other contaminants may be removed by wiping with a solvent such as 3MTM Scotch-GripTM Solvent No. 3.*

      *Note: When using solvents for clean-up, extinguish all ignition sources and follow manufacturer’s precautions and directions for use when handling such materials.

    2. Application

      Production dispensing is best achieved with pressure-flow equipment. Hand caulking guns may also be used.

    3. Clean-Up

      Equipment and excess sealer may be cleaned with solvent such as Scotch-Grip Solvent No. 3 or methyl ethyl ketone.*

      *Note: When using solvents for clean-up, extinguish all ignition sources and follow manufacturer’s precautions and directions for use when handling such materials.

  • Comparable Materials for 3M Metal Sealant 2084

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Questions about this material?

3M - Metal Sealant 2084

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

Anaerobic Adhesives

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Polysulfides in the Aerospace Industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Cure Time Test Methods
Cure Time Test Method
1,440 min Approx.
Viscosity Test Methods
Viscosity Test Method Temperature
7,000 to 2,250 cPs Brookfield Viscometer: RVF #6 sp. @ 20 rpm @ 80°F 26.7°C 27°C
Peel Strength Test Methods
Peel Strength Type Substrate Test Method
25 (lbs./inch) 180° Peel strength Canvas to aluminum Width, Pulled at 2"/minute
% Solids Test Methods
% Solids Test Method
46 % By Weight
40 to 47 % By weight
;