3M Rite-Lok Gasket Maker GM15 Datasheet 3M Rite-Lok Gasket Maker GM15

Information provided by Gluespec
  • Description for 3M Rite-Lok Gasket Maker GM15

    RiteLok gasket maker create formed-in-place gaskets on flanges and housings, eliminating the need for large inventories of pre-cut gaskets.

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: solvent resistance
    Application Type Seal, Gasketing: formed-in-place gaskets on flanges and housings
    1 Part or 2 Part 1-Part
    Material Form Paste
    Manufacturer 3M
    Chemistry Polymer
    Cure Method Exceptional pressure
    Cure Time (min) 60 to 720, 15 to 120
    Viscosity (cPs) 950,000
    Color Purple
    High Temperature Resistance (°C) 150
    Low Temperature Resistance (°C) -54
  • Technical Data for 3M Rite-Lok Gasket Maker GM15

    Overview
    • Chemical Resistance
      • Chemical Resistance : Relative Solvent Resistance - solvent resistance
    • Application Type
      • Gasketing : Formed-in-Place Gaskets - formed-in-place gaskets on flanges and housings
      • Sealant - Seal
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Paste
    • Chemistry
      • Other - Polymer
    • Application Method
      • Other - Hand applied
      • Screen Print - Screen Printable Robotic
    • Cure Method
      • Pressure Sensitive (min) - Exceptional pressure
    • Color
      • Purple
    Specifications
    Cure Specs
    Cure Time (min) 60 to 720, 15 to 120 Test Method
    Viscosity (cPs) 950,000
    Material Resistance
    High Temperature Resistance (°C) 150
    Low Temperature Resistance (°C) -54
  • Best Practices for 3M Rite-Lok Gasket Maker GM15

    *See Terms of Use Below

  • Comparable Materials for 3M Rite-Lok Gasket Maker GM15

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Anaerobic Adhesives

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Polysulfides in the Aerospace Industry

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Which answer best describes a project you are currently working on?
Cure Time Test Methods
Cure Time Test Method
60 to 720 min Unprimed
15 to 120 min Primed