3M Tamper-Proof Sealant 1252 Datasheet 3M Tamper-Proof Sealant 1252

Information provided by Gluespec
  • Description for 3M Tamper-Proof Sealant 1252

    Fire-retardant seal • Resists oil, gasoline, water, jet fuel and fungus • Will not corrode metal • Tack free in 20 seconds

    *See Terms of Use Below

    Chemical Resistance Fungus, Gasoline, Jet fuel, Oil
    Application Type Seal
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Substrate Alclad , Metal, Nitrile, Steel, Brass, Aluminium
    Industry Electronics, Two Wheel Vehicles
    Manufacturer 3M
    Chemistry Nitrile
    Application Method Knife coating, Trowel
    Cure Method Air drying
    Cure Time (min) Fast
    Viscosity (cPs) 500 to 2,500
    Color White
    Volume Resistivity (O) 1e10 (ohms/cm)
  • Technical Data for 3M Tamper-Proof Sealant 1252

    Overview
    • Chemical Resistance
      • Chemical Resistance - Fungus, Gasoline, Jet fuel, Oil
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
    • Chemistry
      • Other - Nitrile
    • Application Method
      • Dispenser - Application equipment, High pressure injection, Pump
      • Roll - Rollercoating
      • Spatula/Trowel - Knife coating, Trowel
    • Cure Method
      • Room Temperature / Air Dry - Air drying
    • Color
      • White
    Specifications
    Cure Specs
    Cure Time (min) Fast
    Viscosity (cPs) 500 to 2,500 Test Method
    Tack Free Time (min) 0.33
    Bond Strength
    Shear Strength (psi) 173, 164 Test Method
    Conductivity
    Dielectric Strength (V/mil) >100 Test Method
    Surface Resistivity (O) minimum 1e10 (ohms) Test Method
    Volume Resistivity (O) 1e10 (ohms/cm) Test Method
    Hardness
    Shore A Hardness 97 to 99 Test Method
    Other Properties
    Flash Point (°F) 24.8
    % Solids (%) 61 to 73 Test Method
    Business Information
    Shelf Life Details Storage: Store at 60-80°F (16-27°C) for maximum storage life. Higher temperatures reduce normal storage life. Lower temperatures cause increased viscosity of a temporary nature. Tubes must be stored in an inverted position (tips down). Rotate stock on a “first in-first-out” basis.Shelf Life: When stored in the original unopened container, under the conditions recommended, this product has a shelf life of 9-12 months @ 40°F (4°C).
    Shelf Life Temperature (°F) 39
    Shelf Life (mon) 9 to 12 Unopened Container
  • Best Practices for 3M Tamper-Proof Sealant 1252

    *See Terms of Use Below

    1. Application

      One-part, air drying compound suitable for hand extruding from a collapsible metal tube. Surfaces must be clean, dry and dust free.

    2. Curing

      A 1/8" layer of 3M™ Scotch-Seal Tamper Proof Sealant 1252 is tack-free in 20 seconds and suitable for stamping with ink.

    3. Clean-Up

      Excess sealant may be removed from application equipment with a solvent such as 3M™ Scotch-Grip™ Solvent No. 3 or methyl ethyl ketone (MEK).*

      *Note: When using solvents, extinguish all ignition sources, and follow the manufacturer’s precautions and directions for use.

  • Comparable Materials for 3M Tamper-Proof Sealant 1252

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Polysulfides in the Aerospace Industry

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Anaerobic Adhesives

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M Tamper-Proof Sealant 1252

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Viscosity Test Methods
Viscosity Test Method Temperature
500 to 2,500 cPs Brookfield Viscometer: RVF #6 sp. @ 4 rpm @ 77°F 26°C 26°C
Shear Strength Test Methods
Shear Strength Type Cure Time Cure Temperature Substrate Test Method
173 psi Overlap Shear Strength 1,440 min 25°C Alclad Average of 6, 1" x 11/2" overlap – 10 mil thick bond line. Specimens were cured for 24 hours @ 77°F (25°C).
164 psi Overlap Shear Strength 1,440 min 25°C Steel Average of 6, 1" x 11/2" overlap – 10 mil thick bond line. Specimens were cured for 24 hours @ 77°F (25°C).
Dielectric Strength Test Methods
Dielectric Strength Test Method
>100 V/mil Fed. Standard #406, Method 4031.
Surface Resistivity Test Methods
Surface Resistivity Test Method
minimum 1e10 (ohms) Fed. Standard #406, Method 4041.
Volume Resistivity Test Methods
Volume Resistivity Test Method
1e10 (ohms/cm) Fed. Standard #406, Method 4041.
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method Hardness Temperature
97 to 99 After 24 hours @ 77°F (25°C), 50% R.H. 25°C
% Solids Test Methods
% Solids Test Method
61 to 73 % By weight