Bostik Chem-Calk FCB Textured Datasheet Bostik Chem-Calk FCB Textured

Information provided by Gluespec
  • Description for Bostik Chem-Calk FCB Textured

    One-component; superior adhesion to fiber cement boards; outstanding elasticity; good adhesion to most building materials.

    *See Terms of Use Below

    Application Type Seal
    1 Part or 2 Part 1-Part
    Material Form Paste
    Substrate Metals, Hardiplank, Wood, Concrete, Vinyls
    Manufacturer Bostik
    Chemistry Urethane
    Cure Method Moisture
    Cure Temperature (°C) 25, 25
    Cure Time (min) 2,880 to 5,760, 20,160
    Viscosity (cPs) Sag, Slump
    Color Tan, Stone, White
    Ozone Resistance Good Ozone resistance
    High Temperature Resistance (°C) 66
    Low Temperature Resistance (°C) -40
    Key Specifications ASTM (American Standard Test Method): ASTM C920; Elastomeric Joint Sealant as Type S, Grade NS, Class 25, Use NT, A and M, CAN/CGSB (Canadian General Standards Board): Canadian Specification CAN/CGSB 19.13, TT (U.S. Federal Specification): TT-S00230C
  • Technical Data for Bostik Chem-Calk FCB Textured

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Paste
    • Substrate
    • Industry
    • Chemistry
    • Application Method
      • Contact - Positive pressure adequate
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    • Color
      • Brown - Tan
      • Gray - Stone
      • White
    • Key Specifications
      • ASTM (American Standard Test Method) : C920 - ASTM C920; Elastomeric Joint Sealant as Type S, Grade NS, Class 25, Use NT, A and M
      • CAN/CGSB (Canadian General Standards Board) : 19.13 - Canadian Specification CAN/CGSB 19.13
      • TT (U.S. Federal Specification) : S-00230C - TT-S00230C
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 25 Test Method
    Cure Time (min) 2,880 to 5,760, 20,160 Test Method
    Viscosity (cPs) Sag, Slump
    Tack Free Time (min) 240 Test Method
    Work / Pot Time (min) 60 Test Method
    Bond Strength
    General Bond Strength (psi) Superior
    Peel Strength (piw) >25 Test Method
    Tensile Strength (psi) 143 Test Method
    Material Resistance
    Ozone Resistance Good Ozone resistance
    UV Resistance Good Test Method
    High Temperature Resistance (°C) 66
    Low Temperature Resistance (°C) -40
    Moisture/Humidity Resistance Moisture/humidity resistance
    Hardness
    Shore A Hardness 38 Test Method
    Elongation (%) 564 Test Method
    Modulus (psi) 79 Test Method
    Business Information
    Shelf Life Details When stored at or below 80°F (27°C), Chem-Calk® FCB urethane weatherproofing sealant has a shelf life of fifteen months from date of manufacture.
    Shelf Life Temperature (°F) <81
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 15
  • Best Practices for Bostik Chem-Calk FCB Textured

    *See Terms of Use Below

    1. Application

      Install backup material or joint filler. Apply Chem-Calk® FCB urethane sealant in a continuous operation using a positive pressure adequate to properly fill and seal the joint. Tool the sealant with adequate pressure to spread the sealant against the backup material and onto the joint surfaces. A tool with a concave profile is recommended to keep the sealant within the joint.

    2. Clean-Up

      Excess sealant should be dry-wiped from all surfaces while still uncured, following with a commercial solvent such as xylol, toluol, or methyl ethyl ketone. Should sealant accidentally begin to cure on adjacent porous surfaces, the excess sealant should be allowed to progress through the initial cure or setup. It should be removed promptly by abrasion or other mechanical means.

  • Comparable Materials for Bostik Chem-Calk FCB Textured

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

What are the Types of Adhesive Sealants? An In-Depth Q&A

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Q&A Tutorial on the Adhesive Sealant Selection Process

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Bostik Chem-Calk FCB Textured

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
25°C Varies w/ Relative
25°C After 14 days cure at 77°F & 50% RH
Cure Time Test Methods
Cure Time Test Method
2,880 to 5,760 min Varies w/ Relative
20,160 min After 14 days cure at 77°F & 50% RH
Tack Free Time Test Methods
Tack Free Time Test Method
240 min ASTM C 679
Work / Pot Time Test Methods
Work / Pot Time Test Method
60 min Bostik Test Method
Peel Strength Test Methods
Peel Strength Cure Time Cure Temperature Test Method
>25 piw 20,160 min 25°C ASTM C 794, After 14 days cure at 77°F & 50% RH
Tensile Strength Test Methods
Tensile Strength Cure Time Cure Temperature Cure Humidity Test Method
143 psi 20,160 min 25°C 50 % ASTM D 412, After 14 days cure at 77°F & 50% RH
UV Resistance Test Methods
UV Resistance Test Method
Good ASTM C 793
Elongation Test Methods
Elongation Test Method
564 % ASTM D 412, at Break, After 14 days cure at 77°F & 50% RH
Modulus Test Methods
Modulus Test Method
79 psi @ 100% Elongation ASTM D 412, After 14 days cure at 77°F & 50% RH
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method Hardness Temperature
38 ASTM D 2240, After 14 days cure at 77°F & 50% RH 25°C