Bostik LoVoc Seal White Datasheet Bostik LoVoc Seal White

Information provided by Gluespec
  • Description for Bostik LoVoc Seal White

    One component urethane sealant; low shrinkage, excellent sealability; can be sanded or painted.

    *See Terms of Use Below

    Application Type Seal
    1 Part or 2 Part 1-Part
    Material Form Paste
    Substrate Aluminum, FRP-Luan, Plywood, FRP
    Manufacturer Bostik
    Chemistry Urethane
    Cure Method Moisture
    Application Temperature (°F) 55 to 100
    Cure Temperature (°C) 21
    Cure Time (min) 1,440, 10,080
  • Technical Data for Bostik LoVoc Seal White

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Paste
    • Substrate
    • Chemistry
    • Application Method
      • Caulking gun
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    Specifications
    Cure Specs
    Application Temperature (°F) 55 to 100
    Cure Temperature (°C) 21 Test Method
    Cure Time (min) 1,440, 10,080 Test Method
    Linear Shrinkage (%) Low
    Tack Free Time (min) 45
    Bond Strength
    Tensile Strength (psi) 90, 60, 75, 75 Test Method
    Material Resistance
    Moisture/Humidity Resistance Moisture/humidity resistance
    Hardness
    Shore A Hardness 35 Test Method
    Other Properties
    Flash Point (°F) 143.6
    Business Information
    Shelf Life Details When stored at or below 80°F (27°C), LoVOC Seal™ has a shelf life of nine months (9 mo.) from the date of manufacture.
    Shelf Life Temperature (°F) <81
    Shelf Life Type From the date of manufacture.
    Shelf Life (mon) 9
  • Best Practices for Bostik LoVoc Seal White

    *See Terms of Use Below

    1. Surface Preparation

      Substrates should be free of all loose contamination, grease, oils, etc. Use isopropyl alcohol or other approved solvent for substrate degreasing. Alcohols must be allowed to completely flash off from the substrate before LoVOC Seal™ application. Temperatures of substrates and LoVOC Seal™ must be above 40°F (4°C). Recommended substrate/ product application temperatures are between 55°F and 100°F (13°C and 38°C).

    2. Application

      Cut nozzle to the desired bead size and puncture the inner foil seal. Place sausage or cartridge into either a manual or pneumatic sausage/cartridge dispenser caulking gun. Apply appropriate pressure to install LoVOC Seal™ so as to insure full contact (surface wetting) to promote sealing and adhesion performance. Tool and finish applied LoVOC Seal™ immediately to promote the best mechanical adhesion and cured appearance.

    3. Clean-Up

      Uncured LoVOC Seal™ can be easily removed from hands, tools and substrates by using Bostik® Hand & Tool Towels. Removing cured LoVOC Seal™ from substrates will require mechanical methods—scrapers, putty knives.

  • Comparable Materials for Bostik LoVoc Seal White

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Q&A Tutorial on the Adhesive Sealant Selection Process

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

What are the Types of Adhesive Sealants? An In-Depth Q&A

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Bostik LoVoc Seal White

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
21°C After 7 days cure at 70°F (21°C) and 50% RH
Cure Time Test Methods
Cure Time Test Method
1,440 min 1/8” dia. Bead
10,080 min After 7 days cure at 70°F (21°C) and 50% RH
Tensile Strength Test Methods
Tensile Strength Type Cure Time Cure Temperature Cure Humidity Substrate Test Method
90 psi Tensile Shear strength 10,080 min 21°C 50 % Plywood after 7 days cure at 70°F (21°C) and 50% RH
60 psi Tensile Shear strength 10,080 min 21°C 50 % Aluminum after 7 days cure at 70°F (21°C) and 50% RH
75 psi Tensile Shear strength 10,080 min 21°C 50 % FRP after 7 days cure at 70°F (21°C) and 50% RH
75 psi Tensile Shear strength 10,080 min 21°C 50 % FRP-Luan after 7 days cure at 70°F (21°C) and 50% RH
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method Hardness Temperature
35 after 7 days cure at 70°F (21°C) and 50% RH 21°C