Bostik Simson ISR 70-01 Datasheet Bostik Simson ISR 70-01

Information provided by Gluespec
  • Description for Bostik Simson ISR 70-01

    Multi-purpose permanent elastic sealant; good aging properties; withstands strong movement.

    *See Terms of Use Below

    Application Type Seal
    1 Part or 2 Part 1-Part
    Material Form Paste
    Substrate Copper, Glass, Aluminium, Polyester, PVC, Galvanised steel, Painted and lacquered wood, Stainless Steel, Brass, Zinc, Powder coated metal
    Industry Caravan, Train, Bus, Truck
    Manufacturer Bostik
    Chemistry SMP (Silyl Modified Polymer), PVC-free, Isocyanate-free, Solvent-free
    Cure Method Moisture
    Application Temperature (°F) 41 to 95
    Cure Temperature (°C) 20
    Cure Time (min) Fast, >1,440
    Color Black, Grey, White
    High Temperature Resistance (°C) 100
    Low Temperature Resistance (°C) -40
  • Technical Data for Bostik Simson ISR 70-01

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Paste
    • Substrate
    • Industry
    • Chemistry
      • Solvent-Free - PVC-free, Isocyanate-free
      • Silyl Modified Polymer (SMP) / MS Polymer - SMP (Silyl Modified Polymer)
    • Application Method
      • Dispenser - Air-pressure gun
      • Brush - Hand
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    • Color
      • Black
      • Gray - Grey
      • White
    Specifications
    Cure Specs
    Application Temperature (°F) 41 to 95
    Cure Temperature (°C) 20 Test Method
    Cure Time (min) Fast, >1,440 Test Method
    Tack Free Time (min) 30 Test Method
    Bond Strength
    Shear Strength (psi) 260 Test Method
    Green Strength (psi) ca.300(pa) Test Method
    Tensile Strength (psi) 130, 245 Test Method
    Material Resistance
    UV Resistance Excellent, Very Good
    High Temperature Resistance (°C) 100
    Low Temperature Resistance (°C) -40
    Moisture/Humidity Resistance Moisture/humidity resistance
    Hardness
    Shore A Hardness 26 Test Method
    Elongation (%) 300 Test Method
    Flexibility Permanently elastic
    Other Properties
    Specific Gravity ca. 1.4 (g/ml)
    Business Information
    Shelf Life Details ISR 70-01 can be stored for 12 months in a closed (unopened) container in a dry place at temp.between +5°C to +30°C (cartridges 18 months)
    Shelf Life Temperature (°F) 41 to 86
    Shelf Life (mon) 12
  • Best Practices for Bostik Simson ISR 70-01

    *See Terms of Use Below

    1. Surface Preparation

      In general ISR 70-01 adheres well without primer on clean, dry, dust- and grease free substrates of aluminum, stainless steel, galvanised steel, zinc, copper, brass powder coated metal, most lacquered metal surfaces, glass, PVC, polyester (GRP), painted and lacquered wood, etc.

      Primer M is a so called 'wash primer' and degreases and prepares the surface of the substrate in one step. On plain, untreated wooden surfaces and other porous substrates Simson Primer P is recommended. for more details concerning Primer M and Primer P consult the specific technical information data sheet.

    2. Application

      ISR 70-01 can easily be extruded with a hand- or air pressure gun at temperatures between +5C and 35C.

    3. Clean-Up

      Cleaning tools or removing uncured residue of Simson ISR 70-01 can be done with a clean, colorless cloth, wetted with Isopropyl alcohol. It is recommended to make a trial first to check possible attack of the substrate by Isopropyl alcohol.

  • Comparable Materials for Bostik Simson ISR 70-01

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Anaerobic Adhesives

Read Article

Polysulfides in the Aerospace Industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Which answer best describes a project you are currently working on?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
20°C Cure rate after 24 hours, 0.125 in., ca. 3 mm, 70°F/20°C @ 50% R.H.
Cure Time Test Methods
Cure Time Test Method
Fast
>1,440 min Cure rate after 24 hours, 0.125 in., ca. 3 mm, 70°F/20°C @ 50% R.H.
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
30 min 20°C 70°F/20°C @ 50% R.H., ca.
Green Strength Test Methods
Green Strength Test Method
ca.300(pa) Physica Rheometer MC100
Tensile Strength Test Methods
Tensile Strength Test Method
130 psi Tensile stress 100%) DIN 53504/ISO 37
245 psi Tensile stress At break DIN 53504/ISO 37
Shear Strength Test Methods
Shear Strength Substrate Test Method
260 psi Aluminum-to-Aluminum DIN 53283/ASTM D1002, adhesive thickness 2mm, test speed 50 mm/min.
Elongation Test Methods
Elongation Test Method
300 % DIN 53504/ISO 37, at Break, ca.
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
26 DIN 53505, ca.