Bostik TopCote Saw Table & Tool Surface Sealant

CONTACT REP

Description for Bostik TopCote Saw Table & Tool Surface Sealant

Anti-friction spray; rust inhibitor; easy to apply; CFC and ODC free.

Application Type	Sealant, Reduce Friction, Release Agent
1 Part or 2 Part	1-Part
Material Form	Aerosol
Substrate	Metal, Plastics, Wood
Industry	Pneumatic Tools
Manufacturer	Bostik
Cure Method	Air dry

Best Practices for Bostik TopCote Saw Table & Tool Surface Sealant

Register for FREE to view more details

Why register?

View Technical Details
View Test Methods
View Key Specifications
View Similar Materials
Save your Project Searches

See what Gluespec offers

Sign up now Already registered? Sign in!

Email: *

Password: *

Confirm Password: *

Do you prefer to see data in °F or °C?

First Name: *

Last Name: *

Phone: *

Company Name: *

Address: *

Postal Code: *

Country: *

Job Function: *

Industry: *

Describe: *

I agree to the terms of use *

*: Required

Technical Data for Bostik TopCote Saw Table & Tool Surface Sealant

*See Terms of Use Below
Overview
- Application Type
  
  Release Agent
  
  Anti-Friction - Reduce Friction
  
  Sealant
- 1 Part or 2 Part
  
  1-Part
- Material Form
  
  Aerosol
- Substrate
  
  Metal
  
  Plastic - Plastics
  
  Wood
- Industry
  
  Industrial - Band saws, Conveyor rollers, Edgers, Feed mechanism, Feed spring, Gang rip saws, Injection molds, Jointers, Miters, Nosepiece, Panel saws, Planers, Printing plates, Shapers, Slide magazine, Sliding surfaces, Table saw
  
  Pneumatic - Pneumatic Tools
- Application Method
  
  Spray
- Cure Method
  
  Room Temperature / Air Dry - Air dry
Specifications
Best Practices for Bostik TopCote Saw Table & Tool Surface Sealant

*See Terms of Use Below
1. Application
  
  To Reduce Friction: Clean saw table or tool surfaces thoroughly with a degreasing agent (i.e., lacquer thinner). Spray a thin, even coat over entire surface. Allow a few seconds to dry to a haze. Rub in lightly with a clean, dry cloth. After a few minutes, buff to a shine.
  
  For Best Rust Protection: After spraying a thin, even coat on all metal areas to be protected, let dry at least 5 minutes before buffing.
  
  For Best Results: Re-spray a second coat. Reapply weekly or more frequently based on work load.
Comparable Materials for Bostik TopCote Saw Table & Tool Surface Sealant

*See Terms of Use Below

Spec Engine^® Results
- EL 609(Sprayon)
  Sprayon EL 609 is a 1-Part Humidity Epoxy / Phenolic Resin Aerosol used to Adhere Metals
- EL 600(Sprayon)
  Sprayon EL 600 is a 1-Part Humidity Epoxy / Phenolic Resin Aerosol used to Adhere Metals
- Compare All
Closest Results from this Manufacturer
- 955-SL(Bostik)
  A one-component, self-leveling polyurethane sealant capable of dynamic joint movement totaling 50% of original joint geometry (±25%). The sealant cures to a tough, flexible rubber when exposed to moisture present in the atmosphere.
- PRO-MS 50(Bostik)
  A one component, low modulus, solvent free Silyl Modified Polyether Sealant. Tenacious bond to difficult substrates, non-yellowing formula.
- Chem-Calk Syl-a-Pocket(Bostik)
  One-component, pourable, pitch pocket filler; high weathering characteristics; non-gassing; exhibits a homogenous filler profile.
- Compare All