Dow Dowsil SE 1750 Adhesive

Dow Dowsil SE 1750 Adhesive Datasheet
  • Description for Dow Dowsil SE 1750 Adhesive

    One-part, flowable adhesive with high tensile strength, Heat Cure, No added solvents, These adhesives generally have long working times so users can enjoy the greatest manufacturing flexibility and reduce waste.

    *See Terms of Use Below

    Brand Dowsil
    Application Type Seal, Gaskets, Adhesive
    1 Part or 2 Part 1 Part
    Material Form Liquid, Silicone elastomer
    Substrate Ceramics, Glass, Reactive metals, Plastics, Resins
    Industry Fixturing parts to printed circuit boards, Reinforcing parts of connectors, Electronic components, Flyback transformer, Sealing lids and housings for ECUs, E-Mobility Solutions, Smart Meters, Smart Home Devices, PCB system assemblies, Fixing parts of connectors, Electronic modules, Electronics parts
    Manufacturer Dow
    Chemistry Silicone elastomer, No added solvents, Versatile cure processing controlled by temperature
    Cure Method Heat Cure, Addition Cure
    Cure Temperature (°C) 150
    Cure Time (min) Rapid, 30
    Viscosity (cPs) 76,100, Flowable, Self-leveling after dispensing
    Color White
    High Temperature Resistance (°C) 200
    Low Temperature Resistance (°C) -45, -55
  • Technical Data for Dow Dowsil SE 1750 Adhesive

    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Elastomer - Silicone elastomer
      • Liquid
    • Substrate
    • Industry
      • Electronic Control Unit - Sealing lids and housings for ECUs
      • E-Mobility Solutions
      • Electronics - Electronic components, Electronic modules, Electronics parts
      • Printed Circuit Board (PCB) - Fixturing parts to printed circuit boards, PCB system assemblies
      • Connectors - Reinforcing parts of connectors, Fixing parts of connectors
      • Transformers - Flyback transformer
      • Smart Meters
      • Smart Home Devices
      • Power Supplies - Sealing lids and housings for power modules
      • Industrial - Condensers, Housing seals, Lids
    • Chemistry
      • Solvent-Free - No added solvents
      • Other - Versatile cure processing controlled by temperature
      • Silicone - Silicone elastomer
    • Application Method
      • Dispenser - Automated or manual needle dispense
    • Cure Method
      • Addition cure
      • Heat - Heat Cure
    • Color
      • White
    • Brand
      • Dowsil
    Cure Specs
    Cure Temperature (°C) 150 Test Method
    Cure Time (min) Rapid, 30 Test Method
    Viscosity (cPs) 76,100, Flowable, Self-leveling after dispensing
    Work / Pot Time (min) Long Test Method
    Bond Strength
    General Bond Strength (psi) Good
    Shear Strength (psi) 590 Test Method
    Tensile Strength (psi) 985, High
    Material Resistance
    Environmental Resistance Environmental resistance
    High Temperature Resistance (°C) 200
    Low Temperature Resistance (°C) -45, -55
    Moisture/Humidity Resistance Moisture/humidity resistance
    Dissipation Factor 0.00200 Test Method
    Dielectric Strength (V/mil) Good, Durable, 725 Test Method
    Dielectric Constant 3.20 Test Method
    Volume Resistivity (O) 1.95 E+15 (ohms/cm) Test Method
    Shore A Hardness 69 Test Method
    Elongation (%) 115
    Flexibility Flexibility
    Modulus (psi) 870 Test Method
    Other Properties
    Specific Gravity 1.500 Test Method
    Business Information
    Shelf Life Details Shelf Life Details, Dow heat-cure adhesives should be stored at or below 25°C (77°C). Containers should be kept tightly closed and kept in cold storage at all times to extend shelf life. Shelf life is indicated by the “Use Before” date found on the product label.
    Shelf Life Temperature (°F) 41, <77
    Shelf Life (mon) 8
    Not Good For
    Don't Use For Some solder flux residues, Organotin compounds, Unsaturated hydrocarbon plasitcizers, Organometallic compounds, Silicone rubber containing organotin catalyst, Sulfur, Polysulfides, Polysulfones, Other sulfur containing materials
    Don't Use With Plastic, Rubber, Non-reactive metal substrates, Teflon®, Non-reactive plastic surfaces, Polyethylene, Polypropylene, Plastic or Rubber Substrates that are Highly Plasticized
  • Best Practices for Dow Dowsil SE 1750 Adhesive

    *See Terms of Use Below

    1. Surface Preparation

      All surfaces should be thoroughly cleaned and/or degreased with Dow OS fluids, naphtha, mineral spirits, methyl ethyl ketone (MEK) or other suitable solvent. Solvents such as acetone or isopropyl alcohol (IPA) do not tend to remove oils well, and any oils remaining on the surface may interfere with adhesion. Light surface abrasion is recommended whenever possible, because it promotes good cleaning and increases the surface area for bonding. A final surface wipe with acetone or IPA is also useful. Some cleaning techniques may provide better results than others

      users should determine the best techniques for their particular applications.

    2. Mixing

      No mixing required

      Upon standing, some filler may settle to the bottom of the liquid containers after several weeks. To ensure a uniform product mix, the material in the container should be thoroughly mixed prior to use.

    3. Deairing/Degassing

      Automated airless dispense equipment can be used to reduce or avoid the need to de-air. If de-airing is required to reduce voids in the cured elastomer, consider a vacuum de-air schedule of > 28 inches Hg for 10 minutes or until bubbling subsides.

  • Comparable Materials for Dow Dowsil SE 1750 Adhesive

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. f1d1e9c6-1865-4f0e-8fc7-6fea115ed8fd
  2. f1d1e9c6-1865-4f0e-8fc7-6fea115ed8fd

Popular Articles

What Are the Differences Between Adhesives and Sealants?

Read Article

Silicones in LED Lighting | Gluespec

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
150°C Heat Cure
Cure Time Test Methods
Cure Time Test Method
30 min Heat Cure
Work / Pot Time Test Methods
Work / Pot Time Temperature
Shear Strength Test Methods
Shear Strength Type Substrate Test Method
590 psi Lap shear strength Aluminum Unprimed Adhesion
Dielectric Constant Test Methods
Dielectric Constant Test Method
3.20 JIS K 6249, @ 1MHz
Dielectric Strength Test Methods
Dielectric Strength Test Method
725 V/mil JIS K 6249
Dissipation Factor Test Methods
Dissipation Factor Test Method
0.00200 JIS K 6249, @ 1MHZ
Volume Resistivity Test Methods
Volume Resistivity Test Method
1.95 E+15 (ohms/cm) JIS K 6249
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
69 JIS, Durometer
Modulus Test Methods
Modulus Test Method
870 psi Tensile Modulus
Specific Gravity Test Methods
Specific Gravity Test Method
1.500 Cured