Dow SL Parking Structure Sealant Datasheet Dow SL Parking Structure Sealant

CONTACT REP
Information provided by Gluespec

  • Description for Dow SL Parking Structure Sealant

    Good weatherability; resilient; long life reliability; unprimed adhesion; seals irregular surfaces; self-leveling.

    *See Terms of Use Below

    Application Type Seal, Bond
    1 Part or 2 Part 1-Part
    Material Form Paste
    Manufacturer Dow
    Chemistry Silicone
    Cure Method Moisture
    Cure Temperature (°C) 25
    Cure Time (min) 20,160 to 30,240, >30,240
    Viscosity (cPs) Self-leveling
    High Temperature Resistance (°C) 149
    Low Temperature Resistance (°C) -45

  • Technical Data for Dow SL Parking Structure Sealant

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Paste
    • Chemistry
    • Application Method
      • Dispenser - Air-powered gun
      • Brush - Hand
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    Specifications
    Cure Specs
    Cure Temperature (°C) 25 Test Method
    Cure Time (min) 20,160 to 30,240, >30,240 Test Method
    Viscosity (cPs) Self-leveling
    Work / Pot Time (min) <60 Test Method
    Bond Strength
    Tensile Strength (psi) 42 Test Method
    Material Resistance
    High Temperature Resistance (°C) 149
    Low Temperature Resistance (°C) -45
    Hardness
    Elongation (%) 1,500, >800 Test Method
    Shore OO Hardness 50 Test Method
    Flexibility Flexible, Resilient
    Modulus (psi) Ultra-low, 15, 7, 8 Test Method
    Other Properties
    Flash Point (°F) 212.0
    Business Information
    Shelf Life Details When stored in the original, unopened container at or below 32°C (90°F), Dow Corning SL Parking Structure Sealant has a shelf life of 12 months from date of manufacture. Refer to product packaging for “Use By Date.” Keep containers tightly closed.
    Shelf Life Type from date of manufacture
    Shelf Life (mon) 12

  • Best Practices for Dow SL Parking Structure Sealant

    *See Terms of Use Below

    1. Surface Preparation

      the surface must be clean, dry and frost-free at the time of sealant application.

      Clean all concrete, masonry and stone joints of all contaminants and impurities. Porous substrates should be cleaned where necessary by grinding, saw cutting, blast cleaning (sand or water), mechanical abrading or a combination of these methods as required to provide a sound, clean, dry surface for sealant application. Dust, loose particles, etc., should be blown out of joints with dry, oil-free compressed air or be vacuum cleaned. Metal and glass surfaces adjacent to masonry should be cleaned by wiping with an oil-free absorbent cloth saturated with solvent such as xylene or toluene. Do not use alcohols as they inhibit the cure.

  • Comparable Materials for Dow SL Parking Structure Sealant

    *See Terms of Use Below

    Spec Engine® Results

    • Dow
      Dowsil 7091 Adhesive Sealant(Dow)

      Alkoxy cure system; non-sag paste consistency; excellent adhesion; cures to a tough, flexible rubber.

    • Wacker
      Elastosil N 2137(Wacker)

      A non-slump, one-part silicone rubber for sealing and bonding applications. When exposed to air moisture it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance.

    • Wacker
      Elastosil N 2199(Wacker)

      A one-part, ready-to-use, acid- and sovent-free, non-corrosive RTV-1 nonslumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Silicones in LED Lighting | Gluespec

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
25°C After 21 days at 25°C (77°F) and 50 percent RH
Cure Time Test Methods
Cure Time Test Method
20,160 to 30,240 min
>30,240 min After 21 days at 25°C (77°F) and 50 percent RH
Work / Pot Time Test Methods
Work / Pot Time Temperature
<60 min 25°C
Tensile Strength Test Methods
Tensile Strength Cure Time Cure Temperature Cure Humidity Test Method
42 psi >30,240 min 25°C 50(%) RH ASTM D 412, As Cured – After 21 days at 25°C (77°F) and 50 percent RH
Elongation Test Methods
Elongation Test Method
1,500 % ASTM D 412, After 21 days at 25°C (77°F) and 50 percent RH
>800 % ASTM C 1135, After 21 days at 25°C (77°F) and 50 percent RH, Ultimate
Modulus Test Methods
Modulus Test Method
Ultra-low Modulus Test Method
15 psi ASTM D 412, at 150% elongation, After 21 days at 25°C (77°F) and 50 percent RH
7 psi ASTM C 1135, at 25% elongation, After 21 days at 25°C (77°F) and 50 percent RH
8 psi ASTM C 1135, at 50% elongation, After 21 days at 25°C (77°F) and 50 percent RH
Shore OO Hardness Test Methods
Shore OO Hardness Shore Hardness Test Method Hardness Temperature
50 ASTM D 2240, After 21 days at 25°C (77°F) and 50 percent RH 25°C